Recording Pc-Edited Data Onto A Tape With Vcr - Canopus ADVC 3000 Bedienungsanleitung

2-3. Recording PC-edited data onto a tape with VCR

Output the DV data from a PC and record it with a VCR.
PC
(DV connector)
Display
When outputting the data
via DV editing software
1
Press the MODE button on the front panel of the ADVC3000 to switch the mode to the [DV
SDI/ANALOG].
Press
2
Use the DV editing software to output your data.
* For the operational procedure of the DV editing software, refer to the instruction manual provided with your
DV editing software.
3
Use the VCR to record the data on tape.
Digital
ADVC3000
(DV connector)
SDI/ANALOG?DV
DV?SDI/ANALOG
Engineered by Canopus
Analog
Monitor
VCR with
component
input/output
Analog
SDI
ANALOG AUDIO
PRESET INPUT LEVEL
VIDEO IN SDI
COMPONENT
COMPOSITE
S VIDEO
AUDIO IN SDI
AES/EBU
BALANCED
UNBALANCED
Analog
Speaker
Light
Chapter 2 - Basic Operations
VCR with SDI
input/output
29
31