Inhaltsverzeichnis - Philips PM 3214 Anleitung

1
2
Contents
1 GENERAL INFORMATION
9
1.1 INTRODUCTION
9
1.2 TECHNICAL DATA
10
1.2.1 C.R.T.
10
1.2.2 Vertical or Y-axis
10
1.2.3 Horizontal or X-axis
11
1.2.4 Main time base
11
1.2.5 Delayed time base
11
1.2.6
X Deflection
12
1.2.7 Triggering of the main time base
12
1.2.8
Triggering of the delayed time base
12
1.2.9
Calibration generator
12
1.2.10
Power supply
13
1.2.11 Environmental conditions
13
1.2.12 Mechanical data
13
1.3 ACCESSORIES
13
1.3.1 Supplied with the instrument
13
1.3.2 Optional
14
2 DIRECTIONS FOR USE
15
2.1 INSTALLATION 15
2.1.1 Safety regulations 15
2.1.2
Local mains connection and fuse protection 15
2.1.3 Connection to an external supply
16
2.1.4 Front cover and instrument positions
16
2.2 CONTROLS AND SOCKETS
16
2.2.1 Cathode-ray tube and POWER controls
16
2.2.2 Vertical channels
17
2.2.3
Horizontal channel 17
2.2.4 Main time base generator 18
2.2.5 Delayed time base generator 19
2.2.6 Miscellaneous 19
2.3 OPERATING INSTRUCTIONS 21
2.3.1 Switching on the instrument
21
2.3.2 Preliminary settings of the controls 21
2.3.3 Input coupling (AC/DC, 0)
21
2.3.4 Use of probes
21
2.3.5 Selection of chopped or alternate modes
21
2.3.6 Differential mode 22
2.3.7 Selection of trigger mode 22
2.3.8 Triggering source 23
2.3.9 X Y measurements
24
2.3.10 Using the delayed time base
24
© N.V. PHILIPS' GLOEILAMPENFABRIEKEN - EINDHOVEN -THE NETHERLANDS - 1976.
PRINTED IN THE NETHERLANDS
1
1
t
t