i Dance PARTYBOX XD25 Bedienungsanleitung Seite 4

CONTROL LOCATION
1. DEVICE CRADLE
Place your tablet or smartphone there.
2. MIC INPUT (l/4"Jack)
6.3mm jack for connecting microphone
3. USB Port ( USB CHARGER)
Connect your smartphone / tablet to this USB port for a DC 5V 1A output charging.
4. AUX IN (Line Input / Audio Input) Input Jack
Connect a music device (MP3 player etc.) to this socket with a 3.5mm mini jack audio cable to play through
XD25.
5. ECHO Button
Turn to adjust the echo sound effect when microphone connected.
6. BLUETOOTH Button
Hold to reconnect Bluetooth pairing connection.
Press the button to play / pause the music.
7. BLUETOOTH Indicator
The indicator will light when bluetooth pairing successful. The indicator will be flash when bluetooth start
pairing now.
8. LED ACTIVATE Button
Press the button to turn on / off panel disco light show.
9. MIC LEVEL Button
Turn this knob to adjust the microphone volume sound level.
10. VOICE CHANGER Switch
Change your microphone voice into beast (LOW) or kid (HIGH) by select this switch. Resume to normal speak
by select this switch to OFF.
11. MASTER LEVEL ( VOLUME) Knob
Rotate to increase or decrease the master volume sound level.
12. STANDBY Button
Press to turn ON the XD25 or put the XD25 into standby mode.
13. LED Light Show Panel
Show LED disco light show.
14. DC IN Jack
Please only connect the included power adapter to avoid any damage to XD25.
15. AUDIO Out (Line Output / Aux Output) RCA Jack
Use RCA cable to connect external PA system to this master output for bigger sound. The sound output level
controlled by XD25 volume control .
16. 16. AUX Out (Line Output / Audio Output) 3.5MM Jack
Use 3.5mm Aux cable to connect external PA system to this master output for bigger sound. The sound
output level controlled by XD25 volume control
EN3