Maytag NEPTUNE MDE7550 Benutzerhandbuch Seite 8

2207274 (Int'l Nep Dryer)
O
PERATING
S S
ETTING A ENSOR
If there are no words on the touchscreen, open the door, touch any key (except Off), or touch the screen to "wake" the
controls.
Home
timed dry freshen up
sensor dry crease removal
air fluff
favourites
(no heat)
Step 1
Select "Sensor Dry". The next screen
will be the Review Screen.
selections are
Start/Pause. If changes need to be
made, follow the next steps.
end chime medium
options
dryness level
normal dry
temperature
medium
Step 4
Review Screen – This screen reviews
your selections before starting the dryer,
and allows you to choose options to
further customise
programme. You
Start/Pause to begin drying or press a
displayed choice to change previous
selections.
Remember: As you use the touchscreen, if you feel you are lost, press Back or Home.
4/12/06 2:50 PM Page 16
I
NSTRUCTIONS CONT
D P
RY ROGRAMME
dryness level
driest
normaldry
temperature
medium less dry
Step 2
Dryness Level – Select "Dryness
Level" to change from the default setting
If the
("Normal Dry"). The dryness level ranges
correct, press
from least dry to driest. Select the level
appropriate for the load. The "Normal
Dry" level will be used for most loads.
Step 5
Options Screen – There are four option
choices available, touch each option to
select or deselect it:
your drying
• "Crease Prevent" - Intermittent tumble
may press
in room temperature air for up to two
hours following the dry programme.
• "Damp Dry Chime" - Chimes when load
is damp.
• "Reminder Chime" - Chimes at the end
of the programme every 5 minutes for up
to two hours.
• "End Chime" - Chimes once when the
selected dryness level is reached.
Press "Continue" to return back to the
review screen.
.
programme chime medium
Dryness
options
drier
normal dry
least dry
Options
7
programme chime medium
Temperature
options
dryness level
normal dry
high medium
temperature low extra low
medium
Step 3
Temperature – Select "Tempe-
rature" to change from the default
setting ("Medium"). The temperature
settings range from extra low to high.
Select the temperature that is
appropriate for the load.
Step 6
If you are satisfied with the selections,
press the Start/Pause touchpad to
begin the programme.