Time Setting; Alarm Setting - Wiseup C2000 Benutzerhandbuch

VII. Alarm Clock Basic Setting
>> Every time the clock camera is powered on, the LCD display will show 12:00 and all
the alarm clock basic setting will be resumed to factory default.

7.1. TIME SETTING

7.1.1. When the clock camera is powered on, press the Set Button once and the year will
start flashing. Use the Up or Down Button to adjust the current year.
7.1.2. Press the Set Button once again to save the year setting and the month will start
flashing. Use the Up or Down Button to adjust the current month.
7.1.3. You can adjust the current day, hour and minute in the way above.

7.2. ALARM SETTING

7.2.1. When the current time is displayed, press the Mode Button once to start setting
alarm.
7.2.2. Press the Set Button once and the hour will start flashing. Use the Up or Down
Button to adjust the hour.
7.2.3. Press the Set Button once again to save the hour setting and the minute will start
flashing. Use the Up or Down Button to adjust the minute.
7.2.4. Press the Set Button once again to save the minute setting. Then you can set the
snooze duration (1-60 minutes).
7.2.5. Press the Set Button once again to save the snooze duration setting. Then you can
choose the desired alarm sound from 6 kinds of alarm rings.
7.2.6. Press the Set Button once again to save the alarm ring setting. Then press the
Mode Button to exit the alarm setting.
7.2.7. Press the Mode Button once again to start setting alarm and press the UP Button
to turn on the alarm setting, then press the UP Button once again to turn on the snooze
duration, next, press the UP Button the third time to exit the alarm setting.
7.3. 12/24-HOUR MODE SWITCH
To change your display from a 12 to a 24-hour clock, press the Up Button in standard time
display mode.