Operation; Video Recording - Wiseup C2000 Benutzerhandbuch

II. What's in the Box
-1× Alarm Clock Camera
-1× Backup Battery
-1× Remote Controller
-1× USB Cable
-1× HDMI Cable
-1× AC110-240V to DC 5V Power Adapter
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Operation
>> Before using, please make sure your clock camera is fully charged.
>> Remove the insulating film both from the end of the backup battery and the remote
controller.
>> Remember to point the remote controller towards the LCD of the clock every time you
press a button.
>> Please make sure the Micro SD card has been formatted already and is securely fitted
into the camera's SD card slot, or it will not work. We recommend you use a SDHC Class
10 Micro SD card.
[Note]:
If no Micro SD card is fitted into the camera, the camera will shut down automatically.
The blue indicator light will keep flashing for 40 seconds and then turn off.
3.1. POWER ON/OFF
3.1.1. Slide the Power Switch to the ON position and press the Power Button once to
power on the camera. The blue indicator light will stay illuminated, indicating the camera
has entered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button once again and slide the
Power Switch to the OFF position. The blue indicator light will flash twice and then turn
off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation
more than 1 minute.

3.2. VIDEO RECORDING