Getting Started With Rover; Install The Battery; Connect Rover To Your Computer; Windows 98Se Users - SmartDisk Rover Benutzerhandbuch

Getting Started with Rover

Your SmartDisk Rover is both entertaining and versatile, featuring portable
data storage, an MP3 music player, FM radio, and voice recorder. Let's
get started quickly by copying some MP3's from your computer to Rover
and enjoying the music. Later, you can read through the rest of the manual
to learn more about the advanced features of your new companion.

Install the Battery

Install the included AAA battery by sliding open the battery door on the
back of your Rover with your thumb. Insert the battery, observing the correct
orientation of + and –, and slide the battery cover back in place.

Connect Rover to your Computer

Windows 98SE Users

If your PC is running Windows 98SE, you'll need to first download a driver
from the Internet and install it on your computer. Please visit the
SmartDisk support web site (see Getting Help later in this manual) and
follow the links for Rover support to obtain all the instructions necessary
to download, install, and use the software. When completed, you can proceed
to Connecting Rover to connect your Rover.
If you are running Windows Me, Windows 2000, or Windows XP, no software
installation is required; just skip on to Connecting Rover.

Mac OS 8.6 Users

If your Macintosh is running Mac OS 8.6 and your computer did not come
with USB support built-in or you have an older model, your system may
not have Apple's USB Mass Storage Support package installed, necessary
for USB connectivity. If you connect your Rover as described below in
Connecting Rover and the Rover drive does not appear on your desktop,
you must install this update. SmartDisk recommends that you try connecting
your Rover before installing this Apple update, as on most systems it is
1