Inhaltsverzeichnis
Werbung
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 /WMA FILE WHICH STORED IN THE MEMORY
MEDIA WITH USB CONNECTING PORT.
1.
SET FUNCTION SELECTOR (18) AT CD/USB MODE AND THEN PRESS
SOURCE BUTTON (16) TO SELECT " USB " MODE.
2.
PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING
INTO COMPLETELY. INSERT STRAIGHT WITHOUT BENDING.
CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD
DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA. CHECK TO BE
SURE THE DIRECTION IS CORRECT BEFORE CONNECTION.
3.
THE SYSTEM WILL START READING THE STORAGE MEDIA
AUTOMATICALLY AFTER CONNECTING, AND LCD DISPLAY (4) WILL
SHOW THE TOTAL NUMBER OF MP3/WMA FILES AND TOTAL NUMBER OF
FOLDER BEING DETECTED.
4.
REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC
AS ABOVE
REMARK
-
THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 AND WMA FORMAT ONLY THOUGH THE
USB PORT.
-
IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3
ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS
NOT A MAUL-FUNCTION OF THE SYSTEM.
ENCODING OF CD/PHONO INTO MP3 FILE
THE SYSTEM IS ABLE TO ENCODE NORMAL CD OR TURNTABLE TO MP3 FORMAT AND RECORDING AT
MEMORY MEDIA WITH USB CONNECTING PORT.
A) CD ENCODING
I) ECNODING 1 TRACK
1.
PERFORM NORMAL PLAYBACK OF THE CD TRACK YOU WANT TO ENCODE & RECORD,
2.
PRESS " REC " BUTTON (11) DURING THE PLAYBACK OF THE DESIRE TRACK, UNIT WILL DISPLAY "
" & "
" AND FLASHING. ENCODING IS PERFORMING NOW.
3.
AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
II) ENCODING 1 DISC
1.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CO DOOR
2.
PRESS THE " REC " BUTTON (11) AFTER FOCUS SEARCH COMPLETED. UNIT WILL DISPLAY "
" & "
" AND FLASHING. ENCODING IS PERFORMING NOW.
3.
AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
III) ENCODING BY PROGRAM
1.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CO DOOR
2.
SELECT THE DESIRE TRACKS BY FOLLOWING "
PRESS " CD PLAY/PAUSE/STOP " BUTTON (20) TO START PLAYBACK.
3.
DUYING CD PLAYBACK, PRESS AND HOLD THE THE
SECONDS TO ENTER THE STOP MODE.
4.
PRESS THE " REC " BUTTON (11) AND THE UNIT WILL DISPLAY "
ENCODING IS PERFORMING NOW.
5.
AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE CD TRACK
-
THE SYSTEM WILL CREAT A " AUDIO " FOLDER AND THEN STORE THE ENCODING TRACK IN IT.
-
THE RECORDING FORMAT IS PRESET AT – MP3
-
NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
-
TO INTERRUPT THE RECRODING, PRESS THE " RECORD " BUTTON AGAIN DURING RECORD MODE
-
RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF TERMINATE THE
ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO
THE USB.
CD DISC PROGRAMMING " PROCEDURES. THEN
" CD PLAY/PAUSE/STOP " BUTTON (20) FOR 2
BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
E-4
" & "
" & FLASHING.
Werbung
Inhaltsverzeichnis
