Switching The Appliance On / Off; Operation; Cleaning - Profi Cook PC-HGA 1196 Bedienungsanleitung

Switching the Appliance On / Off

Power On
1. Switch the on / off switch I / O to position I. The control
light in the on / off switch I / O lights up red.
2. Turn the temperature control clockwise to the desired
temperature.
NOTE:
Depending on the ambient temperature and the content
that is being heated in the tank, differences between the
set and the actual temperature can occur.
To Turn Off
1. Turn the temperature control counterclockwise as far as
it will go to the position °C.
2. Switch the on / off switch I / O to position O. The control
light in the on / off switch I / O turns off.

Operation

Heating and Keeping Warm
1. Fill the potable liquid into the appliance. Note the MIN
and MAX mark.
2. Insert the mains plug into the socket.
3. Place the lid in such a way on the appliance that the
steam vent is located in the back half of the lid. Before
use, turn the lid and lock it with the lock mechanism of
the lid. Slide the lock mechanism towards .
4. Set the On / Off switch to the I position.
5. Turn the temperature control clockwise to the desired
temperature. The temperature control can variably adjust
the temperature between approx. 30 °C - 100 °C.
WARNING:
• Always turn the appliance off before cleaning and disconnect
the power plug. Wait until the appliance has cooled.
• Never immerse the appliance into water or other liquids.
• The appliance is not suitable for cleaning with a jet of water.
Therefore, do not clean this appliance with a pressure water jet!
• Never use flammable detergents (e.g. spirit) because they
cause a higher risk of fire or explosion when the appliance is
next used.
38
PC-HGA1196_IM_new
NOTE:
• The red heating control light will be lit during the
heating period.
• When the set temperature is reached, the heating
control light switches off and the green "keeping
warm" control light turns on; the appliance remains
in "keeping warm" state and holds the set tempera-
ture until it is switched off.
6. In order to drain liquid, pull the tap up or push it down
and hold it in this position, until the cup or tank is filled.
Release the tap after the tapping process, it shuts off
automatically. For a steady flow, push the tap up or down
until it locks, after overcoming a slight resistance; the tap
remains open.
7. Due to the system, a residue of approx. 0.8 litres of liquid
remains in the tank. This amount can be reduced by cau-
tiously tipping the tank forward while draining the liquid.
Pause Operation / End Operation
1. Turn the temperature control (10) counterclockwise as
far as it will go to the position °C.
2. Switch the on / off switch I / O to position O to end the
heating or boiling process.
3.
WARNING:
Danger of scalding due to escaping steam!
Be particularly careful when removing the lid.
To open the lid, slide the lock mechanism towards
and turn the lid.
4. Remove the plug from the socket.
WARNING: Risk of burns!
The housing will be hot during use, do not touch and let
the appliance cool down before storing it.

Cleaning

15.10.19