Technical Features; Power Saving Function; Automatic Picture Quality Adjustment Function (Analog Rgb Signal Only) - Sony SDM-G76D Bedienungsanleitung

Technical Features

Power saving function

This monitor meets the power-saving guidelines set by VESA,
E S
NERGY TAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPMS (Display Power
Management Standard) for Analog input/DMPM (DVI Digital
Monitor Power Management) for Digital input compliant, the
monitor will automatically reduce power consumption as shown
below.
SDM-G76D
Power mode Power consumption
normal 45 W (max.)
operation
active off* 1.0 W (max.)
(deep sleep)**
power off 1.0 W (max.)
SDM-G96D
Power mode Power consumption
normal 48 W (max.)
operation
active off* 1.0 W (max.)
(deep sleep)**
power off 1.0 W (max.)
SDM-G206W
Power mode Power consumption
normal 70 W (max.)
operation
active off* 1.0 W (max.)
(deep sleep)**
power off 1.0 W (max.)
* When your computer enters the "active off" mode, the input signal is
cut and NO INPUT SIGNAL appears on the screen. After 5 seconds,
the monitor enters the power saving mode.
** "deep sleep" is the power saving mode defined by the Environmental
Protection Agency.
Automatic picture quality
adjustment function
(analog RGB signal only)
When the monitor receives an input signal, it
automatically adjusts the picture's position and
sharpness (phase/pitch), and ensures that a clear
picture appears on the screen.
The factory preset mode
When the monitor receives an input signal, it automatically
matches the signal to one of the factory preset modes stored in the
monitor's memory to provide a high quality picture at the center
of the screen. If the input signal matches the factory preset mode,
(power)
1
the picture appears on the screen automatically with the
indicator
appropriate default adjustments.
green
If input signals do not match one of the factory
orange
preset modes
When the monitor receives an input signal that does not match one
off
of the factory preset modes, the automatic picture quality
adjustment function of this monitor is activated to ensure that a
clear picture always appears on the screen (within the following
monitor frequency ranges):
Horizontal frequency: 28–80 kHz (SDM-G76D/SDM-G96D)
(power)
1
indicator
Vertical frequency:
green
orange
Consequently, the first time the monitor receives input signals
that do not match one of the factory preset modes, the monitor
off
may take a longer time than normal to display the picture on the
screen. This adjustment data is automatically stored in memory so
that next time, the monitor will function in the same way as when
the monitor receives the signals that match one of the factory
(power)
1
preset modes.
indicator
If you adjust the phase, pitch and picture position
green
manually while OFF of AUTO ADJUST is selected
orange For some input signals, the automatic picture quality adjustment
function of this monitor may not completely adjust the picture
position, phase, and pitch. In this case, you can set these
off
adjustments manually (page 13). If you set these adjustments
manually, they are stored in memory as user modes and
automatically recalled whenever the monitor receives the same
input signals.
Notes
• While the automatic picture quality adjustment function is activated,
• The picture may flicker during this time, but this is not a malfunction.
18
(GB)
28–81 kHz (SDM-G206W)
56–75 Hz (SDM-G76D/SDM-G96D)
56–75 Hz (<1680 × 1050),
56-60 Hz (=1680 × 1050)
(SDM-G206W)
only the 1 (power) switch will operate.
Simply wait a few moments until the adjustment completes.