Design A Plant; Using The Zones; Zones' Type - Busch-Jäger SAS-W*.1c Serie Kurzanleitung

Busch-/ABB-secure@home
3

DESIGN A PLANT

3.1

USING THE ZONES

The zones are used to group the detectors functionally, for a better use of the system.
In the configuration phase it is possible to create all the necessary zones.
3.1.5 Zones' type
The zones can be:
Anti-intrusion
The anti-intrusion zones group the security sensors that signal
intrusion attempts and that must be enabled only when needed.
They can be armed in the following ways:
•
•
•
H24
H24: automatically groups the safety devices, that must always be
active in order to carry out signals relating to home security (flood
detectors, smoke detectors).
Central Unit / Central Unit with GSM
36
Notification Mode: any intrusion alarm is notified
silently (for example with push notifications or
SMS), without using the indoor and outdoor sirens.
Home Mode: any intrusion alarm is signaled only
through the indoor siren, embedded in the Central
Unit, and notifications (for example push or SMS),
excluding the use of outdoor sirens.
Away Mode: in case of alarm, all the signals
provided by the system will be activated, including
the indoor and outdoor sirens.
3
CHAPTER
DESIGN A PLANT
Rev. 1.0