Safety Instructions - Busch-Jäger SAS-W*.1c Serie Kurzanleitung

Busch-/ABB-secure@home
1.3.4 Safety instructions
WARNING!
Electric voltage! Risk of death and fire due to electrical voltage
of 230 V.
Dangerous currents flow through the body when coming into
direct or indirect contact with live components. This can result
in electric shock, burns or even death.
•
•
•
•
•
•
•
ATTENTION!
Risk of damaging the device due to external factors.
Moisture and contamination can damage or destroy the
device.
Protect the device against humidity, dirt and damage during
transport, storage and operation.
ATTENTION!
The safety zone (H24) and the Notification Mode and Home
Mode do not comply with EN 50131-1.
The functions related to home security, such as flooding
detectors, smoke detectors, and, in general, technology
detectors and the functions of the Home Automation are not
covered by EN 50131 1 and EN 50131 3.
Central Unit / Central Unit with GSM
34
Work on the 230 V supply system may only be performed
by authorised and qualified electricians.
Disconnect the mains power supply before installation
/ disassembly!
Never use the device with damaged connecting cables.
Do not open covers firmly bolted to the housing of the
device.
Use the device only in a technically faultless state.
Do not make changes to or perform repairs on the device,
on its components or its accessories.
Keep the device away from water and wet surroundings.
CHAPTER
GENERAL INFORMATION
Rev. 1.0
1