Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.4 Electric wire substitution
If the electric wire is damaged, the substitution must be done by the producing company, by its
assistance service, or by a qualified engineer. In any case, be sure of having unplugged before
proceeding in such operation.
10. Troubleshooting
If there is an abnormal elevation of the internal temperature of the machine, you should check first if:
• the mains lead is securely plugged
• the power is not subject to variations of ± 10%
In case of malfunctioning and when these a.m. data are correct, you should call your supplier.
Give information on the type of machine and its serial number: these data are shown on the label of
each unit.
11. Correct Disposal
Subject: Legislative Decree n. 151 dtd 25/07/2005
Implementation of Directives 2002/95/EC, 2002/96/EC and 2003/108/EC relating to the
reduction of use of hazardous substances in electrical and electronic equipment, as well to
the waste disposal. ( G.U. del 29-07-2005 n. 175 del - S.O. n. 135) Correct disposal of this
product (waste electrical and electronic equipment). (Applicable in the European Union and
other European countries with separate collection systems).
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate this from other types of wastes and
recycle it responsibly to promote the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take this item for details of where and how they can take this item
for environmentally safe recycling. Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product should not be mixed with other commercial
wastes for disposal. Some pecuniary sanctions to the defaulting user are provided for wrong wasting
of the products with RAEE mark.
12. Control panel
KEYS AND LEDS
1
AUXILIARY
2
DEFROSTING
Switching ON/OFF of internal lighting, if available.
Press and release the AUXILIARY key : the LED light will switch
on/off.
Press and hold down the DEFROSTING key for 4 sec.
If pre-set prerequisites are not met, no defrosting
(ROHS – RAEE)
13
Werbung
Inhaltsverzeichnis
