Cuda surgical LED-4000 Bedienungsanleitung Seite 5

Caution The proximal end tip of installed lightguides and accessories can become hot. Allow
end tips to cool before removing.
Caution The end user is responsible to verify the cable and port are correctly matched before light
guide insertion, otherwise cable or light source damage may occur.
Caution Only FUSED light guides manufactured by ST Technologies (
used with the LED-4000.
Caution If while in use there is a momentary power interruption the LED-4000 will shut-down and
automatically restart it self if the power switch remains in the ON position; however there may be a
restart delay as internal components reset for normal operation.
Caution Use only approved manufacturer accessories and power cables.
contact your distributor.
Caution For grounding reliability, use only hospital grade marked power cord and receptacle.
®
LIT-216 CUDA
SURGICAL
(English)
®
Surgical) should be
CUDA
For more information,
Rev. B
Date of Revision:07/12/18
Page 5 of 112