Cabletech URZ0336A Bedienungsanleitung Seite 24

24
2. Schedule a recording (EPG)
» Press the EPG button to open full listings.
» Select the TV channel using direction buttons.
» Select the TV program you want to record.
» Press the OK button to confirm. A window will appear. There is no need to set options
such as channel, start or end time as they were uploaded from the EPG. To schedule a
recording, select [RECORD] in [Mode] option.
3. Timer
» Press the TIMER button on the remote control.
» Press the red button on the remote control to add a new event.
» Set all the options and confirm by pressing the OK button.
Notes:
» Compatibility with all flash drives is not guaranteed.
» With large amounts of data, it may take longer for the system to read the content of a flash
drive.
» Make sure the file formats are supported by the device.
TIMESHIFT
This function ensures a continuous background recording of the selected channel.
Make sure the flash drive is connected to the USB port of the device!
» Timeshift is activated by pressing the TIMEMSHIFT button on the remote control. you can set
timeshift size in PVR Configure menu. Timeshift will be activated (status bar with cutdown will
be displayed at the bottom of the screen).
» Use the REV/FWD/Play/Pause buttons on the remote control to control the playback
of the recorded video.
» To remove the status bar from the screen without disabling Timeshift, press the EXIT
button on the remote control. To turn off the Timeshift, press the button on the remote
control.
EN
Owner's manual