Channel Search - Cabletech URZ0336A Bedienungsanleitung

Owner's manual
» Delete: Select a channel and press the blue button on the remote control; a warning
message will appear. Press the OK button to delete the channel.
» Favorite: Select a channel and press the FAV button on the remote control. Select
a category for the channel (Movie, News, Sport or Music) and press the OK button to
confirm. Press the EXIT button to return to the channel list. A star appeared next to the
selected channel and it is now marked as favorite channel and automatically added to the
favorite list (a list is available after pressing the FAV button on the remote control in normal
viewing mode). To delete the channel from favorite list, select it by pressing the OK button,
then select [Disable].
EPG: Press the EPG button to display the menu of the electronic TV guide (Electronic Program
Guide), which displays the schedule of programs for a certain period of time for each available
channel. Use the buttons on the remote control to select desired channel. Use the
to select the desired program. Press the OK button to add it to the schedule list and set timer.
Sort:
» By LCN: Sort the channels according to their logical channel number
» By Service Name: Sort the channels according to their name
» By Service ID: Sort the channels according to the ID
» By ONID: Sort the channels according to the ONID
LCN: Turn on/off the function.
PICTURE
Aspect Ratio: Select the desired aspect ratio (4:3 LB/ 4:3 PS/ 4:3 Full/ 16:9 Wide screen/ Auto/
16:9 Pillar Box/ 16:9 Pan&Scan).
Resolution: Select the desired resolution (480i, 480p, 576i, 576p, 720p, 1080i, 1080p (50 Hz)).
TV Format: Select color system (PAL/ NTSC).
Video Output: Select component (RGB) or composite (CVBS) video output mode.

CHANNEL SEARCH

Auto Search: Select this function to start automatic searching and saving available TV channels.
Note: All previously saved channels and settings will be deleted.
Manual Search: This function enables manual searching for TV channels without deleting
previously saved channels and settings. Press navigation buttons to select the desired channel
frequency. Press OK button to start searching for the channel. When the channel is found it will
be added to the channel list. If channels cannot be found during searching, the device will exit
automatically.
EN
21
buttons