en
CLEANING AND CARE
3. Cleaning the Grease Filter
Risk of Fire!
The performance of the exhaust hood is affected by greasy debris; the risk of fire increases with the amount
of deposits. In order to prevent the risk of fire, regular cleaning of the metal filter is recommended.
The necessity of cleaning the grease filter is also displayed via the LED indicators: The red LED on the
ceiling device will begin to light up after 15 hours of operation - when this happen, please clean the filter.
At first press therefore the glass pane with both hands upwards and then slowly down. The underlying
metal grease filter is held by a magnet and can be simply flapped down.
The metal grease filter is to be cleaned at best in a dishwasher or in hot soapy water. Aggressive cleaners
should not be used. The guarantee can´t be applied if a discolouring on the filter is a result of using an ag-
gressive dishwashing liquid. Please avoid temperatures over 55 degrees. Attention: do not use 3-phase-
cleaners or clean the filter in a commercial dishwasher. The use of aggressive cleaners like fuel, acetone,
trichlorethylene destroys the filter!
Reinstate the metal filter after the cleaning and close the glass pane with both hands.
23