Cellink BTST-9000D Handbuch Seite 7

About Pairing
What is pairing?
Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent
security link between the devices and enable quick access to the services provided without the
need to enter passkeys.
Bluetooth Passkey
The Bluetooth Stereo Headset has a default passkey 1234 for pairing, which is stored in its
internal memory. Usually users are required to enter the passkey 1234 in a pairing process with a
Bluetooth mobile phone or other devices; however it depends on the kind of Bluetooth device that
the stereo headset is connected to. Please refer to the users' manual of the devices for the
specific operation.
Note:
The paired devices remain paired even when both of the devices are powered off, or when a
service connection is interrupted or stopped.
FAQ
1. Can I change Bluetooth passkey?
No, the Bluetooth is written into the device when it manufactured and cannot be changed.
2. Can I use stereo headset with audio device and mobile phone at same time?
Yes, the stereo headset can be used with audio device and mobile phone at same time.
However, there could be some compatibility issues on certain brands of models of mobile
phones.
3. Can I use stereo headset while it is in charging mode?
No, the stereo headset cannot be used while it is in charging mode.
4. What is the operating range of BTST-9000D?
The operating range of BTST-9000D is up to 10 meters.
10
5. Do I need to pair the stereo headset with my mobile phone and Bluetooth stereo adapter every
time I use it?
You need to pair the stereo headset with your mobile phone and Bluetooth stereo adapter when
first time using it. You only need to reconnect the stereo headset with your mobile phone and
Bluetooth stereo adapter afterward.
6. How come the track control does not work with my MP3 player?
The track control is a special feature designed for Windows Media Player. It doesn't apply to
MP3 player because most of MP3 players do not support such functions.
7. Can I use the Stereo headset with mobile phone to listen to music?
If your mobile phone is Bluetooth enabled and supports stereo feature (A2DP), then you can
use the stereo headset with your mobile phone to listen to music. However, most of Bluetooth
enabled phones do not support such feature.
Troubleshooting
1. The track control is not working.
- The track control is designed for Windows Media Player only.
- Make sure that you are using Windows Media Player.
2. Music is on and off when the stereo headset is paired with audio device/pc and mobile phone.
- When users try to use stereo headset and audio device / pc at same time, there could be
some compatibility issues on certain brands of models of mobile phones. However, this
problem shouldn't occur when use stereo headset with single device.
Customer support
Please visit our website for customer support and detail information.
http://www.cellink-corp.com
11