Intended Use; Technical Data; Disposal And Recycling - Scheppach BP4A-Li18V Originalbetriebsanleitung

• Warning! This electric tool generates an elec-
tromagnetic field during operation. This field can
impair active or passive medical implants under
certain conditions. In order to prevent the risk of
serious or deadly injuries, we recommend that
persons with medical implants consult with their
physician and the manufacturer of the medical
implant prior to operating the electric tool.

Intended use

Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
This battery has been designed to be charged in
the BC4A-Li18V type charger:
Remaining hazards
The machine has been built using modern technology
and in accordance with recognized safety rules.
Some hazards, however, may still remain.
• Electrical hazards exist when unsuitable electric
connections are used.
• Although having regarded all considerable rules
there may still remain not obvious remaining haz-
rds.
• Minimize remaining hazards by following the in-
structions in "Safety Rules", "Use only as author-
ized" and in the entire operating manual.

Technical data

Battery type
Nominal voltage
Capacity
Operating temperature
Charging duration
Weight
Use
Battery level indicator
By pressing the button (5) on the battery, you can
check the battery level using the battery level indica-
tor LEDs (4) (Fig. 2).
Advice for a long battery service life
m CAUTION!
Never charge batteries below 0 °C or above 40
•
°C.
Do not charge batteries in environments with high
•
humidity or high temperatures.
Do not cover the battery or the charger during
•
charging.
Disconnect the charger mains plug after charging
•
the battery.
10 І 36
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Lithium-Ionen
18 V
4 Ah
0 - 40 °C
120 min
0,6 kg
During charging, the battery and the charger will
heat up. That is normal. Lithium-ion batteries do not
have the known "memory effect". Nevertheless, a
battery should be fully discharged before charging
it, and the charging process should always be fully
completed.
NOTE
Follow the battery charging instructions in the user
•
manual for the power tool or the charger.
Reduced operating durations after charging indi-
•
cate a worn battery. The battery must be replaced.
If the batteries are not used for a while, store them
•
partly charged in a cool place (10-25 °C).
• Store the battery and the device separately from
each other.
Transport
The equivalent lithium content of the batteries includ-
ed in the delivery is below specified limits. Therefore,
the battery as an individual component, as well as the
power tool with its delivery contents, are not subject
to national or international hazardous materials regu-
lations. These regulations may become relevant when
transporting several devices with lithium-ion batteries,
which then require particular safety measures (e.g. for
the packaging). In this case, find out about applicable
regulations for the country of use.
m CAUTION! Do not use batteries with damaged
casings.

Disposal and recycling

m WARNING!
Do not dispose of batteries in household waste, in
fire or water. Do not open worn-out batteries.
Batteries should be collected, recycled or disposed of
in an environmentally friendly manner.
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
trical and electronic equipment. Improper handling
of waste equipment may have negative consequenc-
es for the environment and human health due to po-
tentially hazardous substances that are often con-
tained in electrical and electronic equipment.