Inhaltsverzeichnis
Werbung
CUSTOMIZE A PRESET BEACH
In the case where one of the 200 preset beaches isn't your local beach
you can CUSTOMIZE the tide data for any of the 200 preset beaches
to match your beach.
- Firstly, use the tide set procedure above to preset the beach closest
to your beach.
- Then find the average time offset between the selected preset beach
and your beach. Eg. Bells plus 45 minutes equals my local beach.
- To activate CUSTOM setting, in TIDE mode press and HOLD LAP/
RESET in for 2 seconds, OFFSET appears and a ZERO digit will flash.
- Use START/STOP & LAP/RESET to increase or decrease the time
offset till correct.
- Press MODE/SET to lock in your offset. The watch will then ask you to
rename the preset beach to the new beaches name.
- Use START/STOP & LAP/RESET to scroll through the alphabet and
change the selected letter.
- Press MODE/SET to move to the next letter.
- Once complete, HOLD MODE/SET in for 2 seconds to save all information.
NOTE: To leave the customized beach named as CUSTOM, put in the offset
then HOLD MODE/SET in for 2 seconds to save.
ALSO NOTE: Once you have customized a preset beach, eg. Bells, that
location has been over written and will no longer appear in the watches'
beach list. To return to the original beach name and tide data, you must
be in TIDE MODE, HOLD LAP/RESET in for 2 seconds, the digits will
flash, use START/STOP & LAP/RESET to change the offset back to zero,
HOLD MODE/SET in for 2 seconds and the original beach name, ie Bells,
will reappear in the screen.
Listed Beach
26
* Name changes to "CUSTOM" by default.
Tide Time Offset
(B)
offset is zero
B
( +/- 180 mins max.)
CUSTOM Name
B
go to the next character
(wrap around after the 8th character)
B
6
Werbung
Inhaltsverzeichnis
