Inhaltsverzeichnis
Werbung
FUTURE TIDE SETTING
If you want to know tide and moon information for a specific date in the future until December 2022 the
FUTURE TIDE FUNCTION must be used.
- Press MODE/SET to advance to TIDE MODE. Press START/STOP or LAP/RESET to toggle through
tide data, one tide at a time, past or future, for the selected beach or use the procedure below for
a distant future or past date.
- HOLD START/STOP in for 2 seconds, the year will flash, press START/STOP & LAP/RESET to
select the correct year.
- Press MODE/SET the MONTH will flash in top left hand corner, press START/STOP or LAP/RESET
to select the correct month.
- Press MODE/SET the DATE will flash, press START/STOP & LAP/RESET to select the correct date.
- HOLD MODE/SET in for 2 seconds to save the date you want.
- Press START/STOP & LAP/RESET to toggle through the tide data.
CHRONOGRAPH (STOP WATCH) SETTING
- Press MODE/SET to advance to CHRONO.
- Press START/STOP to start or stop the chronograph.
- Press LAP/RESET to time laps while the chronograph is running.
The maximum number of laps is 99.
- To reset the Chrono to zero HOLD LAP/RESET in for 2 seconds.
TIMER (COUNTDOWN TIMER) SETTING
- Press MODE/SET to advance to TIMER.
Your watch timer is preset to 30 minutes, but can be adjusted to count down from 23hr 59min 59secs. Once
the timer hits zero an alarm will sound for 30 seconds and the counter will then count upwards. This enables
you to know how long ago the alarm sounded.
- Press START/STOP to start or stop the Timer.
- HOLD LAP/RESET in for 2 seconds to reset the Timer to the preset time. You must do this prior to
being able to change the preset time of the timer.
ADJUSTING TIMER TIME to another time period, up to 23hr 59min 59secs.
- HOLD MODE/SET in for 2 seconds, the hour digits will appear and flash. Use START/STOP & LAP/
RESET to select hour you want.
- Press MODE/SET, the minutes will flash. Use START/STOP & LAP/RESET to select minutes required.
- HOLD MODE/SET in for 2 seconds to confirm the time set.
ALARM (X2) SETTING
A separate alarm is provided for each time zone. Ie T1 and T2.
- Press MODE/SET to advance to ALARM.
- HOLD MODE/SET in for 2 seconds and T1 or T2 will appear. Use START/STOP & LAP/RESET to
select required time zone T1 or T2.
- Press MODE/SET, the hour digits will flash. Use START/STOP & LAP/RESET to select required hour.
Make sure you have AM or PM correct in the alarm.
- Press MODE/SET, the minutes will flash. Use START/STOP & LAP/RESET to select required minutes.
- HOLD MODE/SET in for 2 seconds to confirm the settings and the alarm icon appears in the bottom
left of the screen.
- Press START/STOP to turn the alarm icon on or off.
- Press any button to stop the alarm.
24
CHRONOGRAPH
Chrono Lap
2 secs
Lap Time
15
Werbung
Inhaltsverzeichnis
