Troubleshooting; Error Correction - Deltafox DP - CAG 2015 Originalbetriebsanleitung

Troubleshooting

Turn off the appliance and, before doing any servicing, remove the battery.
Problems
Device doesn't
start
Grinding tools do
not move although
the engine is run-
ning
Engine is slower
and stops
Grinding disc does
not rotate smooth-
ly, abnormal noises
can be heard
Possible Cause
Battery ( 7) discharged
Battery ( 7) not inserted
On/off switch (
defective
Engine faulty
Grinding disc nut (
loose
Workpiece, remaining work-
pieces or remaining grinding
tools block drive
Device is overloaded through
workpiece
Grinding disc nut (
loose
Grinding disc is defective

Error correction

Recharge battery (see „Charg-
ing")
Insert battery (see „Operation")
4) may be
Repair by Customer Care
Tighten grinding disc nut
19) is
( 19) (see „Changing the
grinding disc")
Remove blockages
Reduce pressure on grinding
tool
Workpiece unsuitable
Tighten grinding disc nut
19 is
( 19) (see „Changing the
grinding disc")
Change grinding disc
GB
41