Mousetrapper MTkeys Kurzanleitung Seite 3

English
1 Connecting Mousetrapper
Installation
Connect the supplied cable to the socket on the left
side of your Mousetrapper, and connect the other end
to a USB port on the computer. Once installed, your
Mousetrapper and its buttons will operate as shown in
figure 2.
Wireless use
Remove the dongle from the right side of the product
and insert it into a USB port on the computer. Then
disconnect the installation cable. Hold down the on/off
button on your Mousetrapper for around 3–5 seconds.
Charging the battery
The battery in your Mousetrapper needs charging
when the battery indicator flashes red. Connect the
Mousetrapper using the included USB cable and
allow it to charge until the battery indicator shines
green. Disconnect the USB cable. To activate the
wireless function, hold down the On/Off button for
about 5 seconds.
2 Basic tips
Positioning
Position your Mousetrapper between you and your
keyboard. The space bar on the keyboard should
be directly in front of the control pad, as shown in
figure 1.
Scrolling
To scroll using the control pad, place your finger on the
right edge of the control pad. There is no need to press
on the control pad, simply slide your finger up or down
the edge, depending on which way you want to scroll.
3 Customising
MTKeys
To customise the button functions, go to
mousetrapper.com/mtkeys and download the software.
Then follow the instructions. If you have Windows 10,
you can download MTKeys from Microsoft Store.
When you have downloaded MTKeys, an image of the
product will appear that matches the image underneath
your Mousetrapper. Position the cursor over the button
you want to customise. Click on it by lightly pressing
on the control pad once. You will now see a pull-down
menu that lets you assign whichever action you want
to that button. You can choose between functions such
as adding an extra left-click, creating shortcuts and
inserting text by pasting it in.