Storage Care - Lentz 20517 Bedienungsanleitung

BURST OF STEAM
This function provides an extra amount of steam to remove stubbom wrinkles
fill the iron with water
turn the temperature control to the position "MAX"
the pilot light turns offwhen the required temperanire is reached
the iron is ready for use
press the burst of steam button once
stcam will pcnctrate into thc garment to remove the wrinklcs
wait a few seconds before pressing the steam control knob again
when there are stubborn wrinkles
usually all wrinkles can be removed within three pressings
SAFETY PROTECTIVE CUT-OUT
In the unlikely event of the thermost.lt failing, the protection cut-out will operate to prevent the
iron overheating.
Then the iron should be taken to the nearest authorized service facility.

STORAGE CARE

Turn the temperature knob to MIN and unplug the power store the iron after it is
cool completely.
For storage, place it vertically, and never horizontally with the bottom downwards.
Avoid ironing over zippers/rivets on jeans etc. These can scratch the soleplate.
9