Setting The Language; Management Of Cooling Unit; Advanced Set-Up - INE SKYLINE HFP3000 Bedienungsanleitung

INE SpA Via Facca, 10 - 35013 Cittadella - PADOVA - ITALIA Tel. 049/9481111 - Fax 049/9400249 - ine@ine.it - www.ine.it

14.2 Setting the language

To select the user language:
•
From the general settings menu, turn one of the
rotary switches and select language selection icon
; to confirm, press 'E2'. Alternatively, tap the icon
on the screen.
The display changes as shown in the following diagram.
E1
•
Turn 'E2' right or left to select the required language:
•
Settings are confirmed by tapping HOME
pressing 'E2'; following confirmation the main screen
reappears.

14.3 Management of cooling unit

To manage the cooling unit:
•
On the general settings menu, turn one of the rotary
switches and tap to manage the cooling unit
confirm, press 'E2'. Alternatively, tap the icon on the
screen.
The display changes as shown in the following diagram.
E1
•
Turn 'E2' to turn the cooling unit ON or OFF.
•
Settings are confirmed by tapping HOME
pressing 'E2'; following confirmation the main screen
reappears.
If the cooling unit is present but not on, this
icon will appear on the bottom left of the
screen.
i
Note: enabling of the unit on this screen is also
used for loading the coolant.

15 Advanced set-up

To access the advanced set-up menu:
Turn the machine off using the switch at the back.
Hold down 'E1', turn the machine on and wait for the
following screen to appear.
To select one of the options:
E2
E1
or by
•
Turn one of the rotary switches and tap the required
icon ; to confirm, press 'E2'. Alternatively, tap the
icon on the screen.
•
To exit and go back to the main menu, tap HOME
.
Possible operations are:
; to
View the firmware version of the machine and
other useful information.
Set the date and time.
Reset all parameters to factory settings.
To set the screen lock code: by choosing this
E2
option a lock code can be set to lock the display
on the main screen. Any operations besides
those on the main screen are protected by the set
code.
or by
Managing the saved programs on USB (only for
authorised operators).
Information reserved to servicing (only for
authorised operators).
Page 32
E2