Audio Processing - Grass Valley INDIGO AV Mixer Kurzanleitung

5.4 Audio Processing

Audio Follow Video
5.4.1 Mic Inputs
INDIGO AV Mixer Quick Start Guide
This section shows you how to process and mix audio signals with the
INDIGO AV Mixer.
You can assign one or more audio channels to a video channel.
Thus, when this video channel is selected, the assigned audio channels are
selected automatically. The audio channels' volume levels can be adjusted
for On Air and Off Air.
To assign an audio channel to a video channel:
1. Select the main menu.
SETUP
2. Select the submenu.
AUDIO
3. Press Follow Video .
4. If required, press
AVF Enable
5. Select the desired video channel from the Video Sources list.
6. Press the
Audio Source
7. Select the desired audio channel from the Audio Sources list.
8. Press the button.
Level-Set
9. Use the two faders of the small area next to the Audio Sources list to
adjust the audio levels for On Air and Off Air.
You may also use the Digipots to adjust these values for the selected
audio source.
10. If required, repeat steps 7 to 9 to assign further audio sources.
Note Activated (enabled) video and audio sources are displayed as green entries
within the lists.
If required, switch on phantom power (+48 V DC) for microphones.
You may, for example, pan the signals, route them to buses and set the
desired volumes.
to display the Video Sources.
button to display the Audio Sources list.
Audio Processing
29