Making An Effect Transition - Grass Valley INDIGO AV Mixer Kurzanleitung

5.3.4 Making an Effect Transition

INDIGO AV Mixer Quick Start Guide
With this type of transition, the background remains unaffected.
Note The following example uses Key 1 in SD mode, but you can also use Key 2
and/or HiRes mode.
To make an effect transition:
1. Select
Key 1 [NEXT TRANSITION]
Key 1 [BUS DELEGATION]
2. Make sure
Key 1 [BUS DELEGATION]
3. Make sure main menu is selected.
KEYER
4. Select the submenu and press
SD KEY 1
5. Select Type .
6. Select .
Source
7. Go to the
TRANSITION
8. Select .
SD Key 1 In
9. Select the desired category and pattern, for example,
10. If necessary, go to the
11. Select .
SD Key 1 Out
12. Select the desired category and pattern, for example,
13. If necessary, go to the
14. Make sure is selected.
FX
15. Press the
Mix [KEY 1]
– or –
Press the button.
AUTO
– or –
Move the
Transition Lever Arm
.
is selected automatically.
is selected.
.
Type
main menu.
submenu to adjust the timing settings.
DURATION
submenu to adjust the timing settings.
DURATION
button.
to the opposite position.
Video Processing
and .
Slide Left
and .
Wipe Circle
27