Using The Weighing Scale; Weighing Mode; Downloading The Application; Data Transfer - VISIOMED bewell connect BW SC2W Bedienungsanleitung

3.2. USING THE WEIGHING SCALE

- Weighing mode

1
1 Display
Overload warning: Immediately remove anything on the scale if the screen displays Err.
Irreversible damage could be caused to the device.
- Bioelectrical Impedance Analysis mode (weighing and calculations: fat, muscle, water, bone
and daily calorie needs): available on the App, only available for MyScale Analyzer BW-SC2W
and MyScale Analyzer XL BW-SC6W.
Choice of the weighing unit
Go to the App MyScale to select Kilos or Pounds.
Weighing mode
Step onto the scale. It lights up. The screen displays 0:0, and then your weight. The digits flash,
and then stabilize and remain on continuously.
Programming of personal data
Program your personal data, such as age, size or sex directly in the MyScale application.
26 BewellConnect - BW-SC2 W / BW-SC3 W / BW-SC4 W / BW-SC6 W - User Manual - 082017
2
3
2 Bluetooth 3 Weight unit

DOWNLOADING THE APPLICATION

Download the BewellConnect® application to your smartphone or tablet:
- by the App store or Google Play
Then click the MyScale icon.

DATA TRANSFER

To follow the evolution of your weight and your proportions, connect your device
(smartphone, tablet) by Bluetooth (connectivity Bluetooth 4.0 smart Low Energy, compatible
from iPhone 4S).
Open the app and select your profile. Open MyScale and go to the measure screen before
weighing yourself, in order to save your data.
Switch on the scale by stepping on it.
Bioelectrical Impedance Analysis mode (weighing and calculations) only available
for MyScale Analyzer BW-SC2W and MyScale Analyzer XL BW-SC6W: To obtain accurate
measurements, it is important to position your feet on the plate sensors correctly and stay
still during the weighing.
The data transfer is automatic. Simply assign the measurement taken to a profile. You can
consult your BMI (body mass index) and your history on the application.

3.3. CHANGING THE BATTERIES

The battery compartment is located on the back of the device.
- When using for the first time, insert 4 new AAA batteries in the scale.
- When the LCD screen displays the icon
batteries, taking care to observe the correct polarity. Incorrect polarity can cause damage and
compromise the warranty of your appliance.
Never insert rechargeable batteries. Use single-use batteries. Do not mix old and new batteries.
Do not dispose of your old batteries with your household waste.
Take your dead batteries to a collecting agency.
If the device is not to be used for a long time, be sure to remove the batteries to avoid any
leakage of liquid that may damage the unit.
BewellConnect - BW-SC2 W / BW-SC3 W / BW-SC4 W / BW-SC6 W - User Manual - 082017
, the batteries are low or dead. Replace the dead
27