Basic Operation - Avtek TouchScreen 65 Gebrauchsanleitung

4. Basic operation

Standby Setup: When the AC power cord is connected to the power network the Avtek LED
Interactive Whiteboard is in Standby mode ready to be turned on.
Plugging the cable of the external source (HDMI or VGA) with signal turns the display ON.
Avtek LED Interactive Whiteboard automatically senses the external sources.
When there is no signal from the external source the Avtek LED Interactive Whiteboard goes
into Standby mode.
Plug the USB cable which transfer the data of the touch screen to external sources. To
operate the touch sensor, connect the USB cable from a computer to the sensor USB, and
then turn on the computer.
Please connect the line in cable while using the VGA source for transferring the audio data.
When using HDMI cable the video and audio signal is transferred automatically.
Please use your external source's display settings on the computer and select Avtek LED
Interactive Whiteboard as a displaying device.
17