ECOLAB Inspexx SD Gebrauchsanweisung Seite 15

Settings
Fig. 5.0 Return to settings.
Fig. 5.1 Log out and go back.
Fig. 5.2 Min. Alarm limit for low chemical level.
Fig. 5.3 Amount of chemical per thousand.
Fig. 5.4 Max. Alarm limit for high chemical content.
Fig. 5.5 Start the unit. Shows when the unit is not in operation.
Fig. 5.6 Stop the unit. Shows when the unit is in operation.
Fig. 5.7 Change language in display.
Fig. 5.8 If e.g. 100 litre is stated, the mix is calculated for each 100 liter. Then a new calculation begins.
Fig. 5.9 Total amount of water in liter. Adjustable.
Fig. 5.10 Total amount of chemical in liter. Adjustable.
Fig. 5.11 Button for manual filling.
Manufactory level
Fig. 6.0 Return to settings.
Fig. 6.1 Type in product
Fig. 6.2 Type in max.
Fig. 6.3 Type in min.
Fig. 6.4 Changes between sensor or not
Fig. 6.5 Pulse rate on chemical.
Fig. 6.6 Pulse rate on water.
Please note!
This page is only available via log in.
Please note!
This page is only available via log in.
15