Manual Instruction; Operating Instructions - Optimum RK-0261 Bedienungsanleitung

RK0261_IM_201.qxp 2010-10-15
Important safeguard
1. Read all instructions.
2. Before use check that the voltage of your wall outlet
correspond to the rated voltage manner
3. Do not operate the appliance with a damaged cord or
after malfunction or has been damaged in any manner.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
4. Do not let cord hang over edge of table or counter or
touch hot surface.
5. Do not immerse cord or the motor unit into water as
this would give rise to electric shock.
6. Close supervision is necessary when your appliance is
being used near children or infirm persons.
7. The use of accessory attachments not recommended
by the appliance manufacturer may result in fire, elec-
tric shock or injury to persons.
8. Switch off and unplug the appliance before changing
accessories.
9. Do not place an appliance on or near a hot gas or on a
heated oven.
10. Never eject beaters or dough hooks when the appliance
is in operation.
11. Ensure fingers are kept well away from moving beaters
and dough hooks.
12. Do not operate the appliance for other than its intend-
ed use.
13. Always disconnect the blender from the supply if it is
left unattended and before assembling, disassembling
or cleaning.
14. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or
instruction concerning use of the appliance by a per-
son responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Household use only
Dane techniczne:
Moc: 200 W
Napięcie: 220-240 V ~
Częstotliwość: 50 Hz
Poziom hałasu: 80 dB
List of parts:
1. Handle
2. Turbo switch
3. 6-Speed switch
4. Eject button
5. Beaters
6. Dough hooks
7. Blending rod
6
11:16 Page 6 (Black plate)
Food Mixer RK-0261

MANUAL INSTRUCTION

BEFORE USING YOUR MIXER
1. Before use, unpack and remove all packaging. Retain
the packaging and receipt until completely satisfied with
your product.
2. Do not plug in the power cord and ensure that the 6-
speed control switch is in the "0" off position.
3. Wash the beater and dough hooks in warm soapy water
and dry thoroughly.
Use a damp cloth to wipe over the mixer and dry with a
soft clean cloth.
Never immerse the mixer, cord set or plug in water or liq-
uid of any kind. Never hold under water.
4. If not using immediately, see storage instructions within
"Care and Cleaning" section.
MIXER CONTROLS
Eject Button: This easy press button releases all attach-
ments from the mixer sockets without any fuss. The eject
button can only be pressed when the 6-speed switch is set
the "0" off position.
6-speed switch: The switch has 6-speed setting that can be
selected for all your mixing tasks. This switch also has a "0"
setting to turn the mixer off after use.
Beaters and Dough Hooks: A pair of beaters and dough
hooks is supplied with the mixer.
The beaters and dough hooks have a set method of fitting
into the mixer socket because they are not identical and are
interchangeable.
First select the beater or dough hook with gear, see FIG .A.
Looking at the underside of the mixer and at the left hand
socket insert the notched end of the beater or dough hook
into the left socket. Then twist the beater or dough hook in
an anti-clockwise direction to locate the notch on the beat-
er or dough hook correctly in the socket, while pushing it
fully into the socket until a click is heard. The beater or
dough hook should be firmly fitted to the socket.
Repeat the same method with the remaining beater or
dough hook without gear, connecting the notched end of
the beater or dough hook into the right hand side socket.
See FIG .B.
FIG. A
Notes using the blending rod
1. Blending rod can blend vegetable and fruits.
2. Insert blending rod into the back cover of Motor unit,
ensuring it locks into position. Then insert it into contain-
UK
FIG. B
Gear