Multicard Reader - Fujitsu Siemens Computers Living Home SCALEO EV Benutzerhandbuch

Starting Up

4.1.3 Multicard reader

Your SCALEO EV is equipped with a multicard reader on the front. The multicard
reader can be used to read and write to memory cards of different types.
The following cards are supported: CompactFlash I/II, IBM Micro Drive,
SmartMedia, MultiMedia, Secure Digital, Memory Stick, Memory Stick Pro, xD.
IMPORTANT! If the access display (LED) is illuminated, please do not remove a
memory medium as data loss may occur and the memory medium
may be irreversibly damaged. Disconnect the drive in the operating
system by right-clicking on the drive and selecting the Eject menu
item.
Information on handling memory cards:
•
Memory sticks and SD cards are inserted into the memory slot with the contacts
facing downwards.
•
The SmartMedia card is inserted in the slot with the contacts facing upwards.
•
With CompactFlash and Microdrive, please note that these should be inserted
in the corresponding slot with the contacts facing forwards and the type label
upwards.
IMPORTANT! Do not use force, for the memory media can be easily inserted in
and also removed from the intended slot.
12