Technical Data; General Information; Safety Notes; English 77 - HACH LANGE SIP 10 Bedienungsanleitung

Technical data

Subject to changes.
Performance specifications
Cell
Plastic
Wavelength
range
Quartz glass
Rinsing volume
Flow speed
Interface
Power supply
Ambient storage requirements
Ambient operating
requirements
Dimensions
Weight
Enclosure rating
Dual Path Length Pour-Thru Cell,
1 inch/1 cm, plastic
Pour-Thru Cell, 1 cm, quartz glass
340–900 nm
190–900 nm
Minimum of 25 mL
1 mL/second
USB type A
Via USB cable, 530 mA, 5 V
–10–60 °C (14–140 °F), 85 % relative
humidity
(without condensate formation)
10–40 °C (50–104 °F), 80 % relative humidity
(without condensate formation)
120 × 85 × 200 mm
0.5 kg
IP30

General information

Safety notes

Please read the entire manual before the equipment is unpacked, set up
or put into operation. Observe all hazard and warning notes. Failure to
do so could lead to serious injury of the operator or to damage to the
device.
To make sure that the device safety features are not impaired, this
device must not be used or installed in any manner other than that
specified in this user manual.
Hazard notes in this manual
D A N G E R
Indicates a potentially or imminently dangerous situation that, if it is not avoided,
leads to death or to serious injuries.
WA R N I N G
Indicates a potentially or imminently dangerous situation that, if it is not avoided,
can lead to death or to serious injuries.
C A U T I O N
Indicates a possible dangerous situation that can have minor or moderate injuries
as a result.
N O T I C E
Indicates a situation that, if not avoided, could result in damage to the device.
Information that particularly should be emphasized.
Note: Information that supplements aspects from the main text.
English

English 77