AQUAJAM AJ2 Bedienungsanleitung Seite 5

Power on: Press and hold Power ON/OFF button for 4
seconds, a sound prompt will indicate
the AQUAJAM is powered on.
1. The AQUAJAM will automatically enter pairing mode and begin
searching for other Bluetooth wireless enabled devices.
2. In the Bluetooth settings of your Smartphone, tablet, or media player
switch Bluetooth ON and select the option to "Search for Devices".
3. Find & select (tap) "AQUAJAM" on your Smartphone/Tablet to complete a
successful pairing. (If prompted for a passcode use 0000.)
4. Once the pairing is complete and the Bluetooth connection made you will
hear a "beep" tone from the speaker.
5. Now navigate to your music player or music app, press play and enjoy
your music wirelessly.
6. For reconnection ensure Bluetooth is enabled and then press the ON/OF
button to power the speaker on and it will look for the last paired
device rst.
The speaker performance and sound may vary when wet.
**For optimal performance the battery should be
fully charged before rst use.
Quick Start
(pairing)
4.
ENG