Sunshower SOLO Installationshandbuch Seite 14

INSTALLATION
FINISH INSTALLATION
INSTRUCTIONS
Switch on the circuit or residual
current circuit breaker.
The on/off button on the
Sunshower will flash briefly (do
not touch the on/off button
when it flashes; the Sunshower is
calibrating).
If the power button does not
flash, check that the connector is
correctly fitted.
Test whether the Sunshower
operates correctly by turning it
on with the on/off button. Press
the on/off button again to turn off
the Sunshower. The Sunshower
will cool down for another four
minutes.
The Sunshower is ready for use!
14
INSTALLATION GUIDE SOLO | P1327 REV D