Assembly; User Instruction; Before Use - Vestalite TPVESTWEU Bedienungsanleitung

English

ASSEMBLY

• Remove all packaging materials.
• Clean the device with a wet cloth and some detergent if necessary (also see the paragraph "maintenance
and cleaning").
• Make sure that all parts are clean and dry before assembling the appliance.
1. Place the nut into the hole at the top of the main unit (Fig. 1).
2. Attach the handle to the main unit (Fig. 2).
3. Turn over the unit, place the bolt into the hole on the back of the handle and turn clockwise to tighten
(Fig. 3)
4. Push the lock button turbo brush (28) while you place the main unit on the turbo brush (17) (Fig. 4).
5. Place the plastic cover filter (12) in the dust container (13).
6. Then put the Washable filter (11) in the plastic cover filter.
7. Mount the dust container with Washable filter thereafter on the motor (8). The hand vacuum cleaner is
now fully assembled.
8. Push the hand vacuum cleaner next, with the mouth opening downwards, into the main unit until you
hear a click (Fig. 5).
9. Use the screw to attach the mounting bracket to the wall (Fig. 23)
IMPORTANT: After use, clip the handle of the unit into the wall mounting bracket (Fig. 24)
Fig. 23 Fig. 24
THE USE

Before use

• Charge the device for at least 24 hours before first time use (Fig. 6). After this first charge, the maximum
charging time will be 16 hours.
Note: the device may become warm during charging. This is normal.
• Check the device for damage before each use. Do not use the device if it is damaged or not working
properly.
3