Canopus ADVC HD50 Handbuch Seite 9

2-2 ADVC-HD50 Rear Panel
(1)
(1) HDMI port
HDMI input port.
(2) IEEE1394 6pin port
IEEE1394 6pin port. Used to output HDV signal. ADVC-HD50 can operate with
bus power supplied from the device, such as a PC, connected with the supplied
IEEE1394 Firewire cable(6pin-6pin).
(3) Power terminal
Connect the approved AC adapter (optional), if necessary.
*Never connect anything other than an approved AC adapter (optional).
(4) MNT. switch
Used for maintenance only.
(2) (3)
― 5 ―
(4)