Table of Contents GETTING STARTED ..........................5 INSTALLATION FOR WINDOWS......................6 Device Driver Installation......................6 Verify Device Driver Installation ....................8 Setup The Sound ........................9 Device Driver Un-installation ....................11 INSTALLATION FOR MAC ........................ 12 Device Driver Installation......................12 Setup The Sound ........................
Seite 4
ULTRA STATION USER MANUAL This intelligent USB 3.0 Laptop Docking Station enables you to add a 2 monitor instantly via HDMI or VGA connectors. When you need to get things done fast, simply connect your monitor, keyboard, mouse, Ethernet, speakers, microphone and any other USB3.0 / 2.0 peripheral to your laptop with one USB 3.0 cable.
Seite 5
Host (2) Upstream Port USB 3.0 Micro B Female connector Cable USB 3.0 Micro B to Type A Downstream Port USB 3.0 Type-A Female Connector with Battery Charge Downstream Port USB 3.0 Type-A Female Connector Downstream Port USB 2.0 Type-A Female Connector Video VGA Port (5) DB 15pin Female Connector...
ULTRA STATION USER MANUAL Speaker(7) 3.5 mm stereo audio out Wormhole Switch(11) Wormhole port USB 2.0 mini B Female connector Cable USB 2.0, mini B to Type-A (2 meter) Transfer Rate Up to 20 Mbps, transfer rate Physical Specification Housing Material Aluminum Dimensions Main body: 386.4(W)x 28.5(H)x22(D) mm...
1. Start Device Driver Installation (please refer to your PC system OS installation in next section) *Note: install driver completely before following steps. 2. Plug the Power Adapter to Port 1 3. Connect USB 3.0 Cable Micro-B connector to Port2 ,type A to host laptop 4.
Seite 8
ULTRA STATION USER MANUAL 3. Read the license agreement, check “I 4. When Install Shield Wizard is complete, accept the terms of the license select “Yes, I want to restart my computer agreement,” click Next > now.” Click Finish to restart. 5.
Windows XP: You can modify the corresponsive position of each extend display via display settings. Go to “START” → “Control Panel” → “Display Properties” →“Settings” When Display Properties windows appears, each monitor‟s number can be identified by clicking “ “ identify” Drag the monitor to the location you want.
ULTRA STATION USER MANUAL Setup The Sound Microsoft’s audio system restricts the audio function to one output at a time; therefore, when using the USB HDMI display Device only one output will receive audio. The following explains how to set-up and change the default sound output from the display device connected with the USB 3.0 ULTRA STATION.
Seite 11
3. To change the default sound output, use 4. Select the Speaker you want and then click “Set Default” your mouse to right click in the sound options box on your desktop, then select “Test” to choose which speaker you want to use as your default.
ULTRA STATION USER MANUAL 3. Select “the Default device” you want, and click “apply”. then click “ Volume” to choose which speaker you want to use as your default. Device Driver Un-installation ※ Unplug the USB Cable of the ULTRA STATION before uninstalling the driver 1.
3. When the Driver is completely uninstalled, select “Yes, I want to restart my computer now”. Click Finishto restart. INSTALLATION FOR MAC Device Driver Installation Installing the device driver enables your computer’s operating system to recognize the ULTRA STATION. Be sure that you are referring to the appropriate installation procedure before you begin installing.
Seite 14
ULTRA STATION USER MANUAL 4. Click “Agree” to proceed 5. Click “ Install” to proceed 6. Type in your password and click “OK” Installation is processing…This will take a few moments 7. Installation is completed, click “ Close” 8. After Lan driver installation finished, Choose the OS version you are using and press “Install Driver”...
Seite 15
9. Click “Continue” to proceed 10. Type in your password and click “OK” 11. Click “Continue Installation” 12. Installation is processing…This will take a 13. Click “Restart” to complete the software few moments installation...
ULTRA STATION USER MANUAL Setup The Sound Mac audio system restricts the audio function to one output at a time; therefore, when using the USB ULTRA STATION only one output will receive audio. , and then “System Preferences” 2. Go to the “System Preferences” and select 1.
Verify Device Driver Installation The following procedure helps you to verify the driver installation status of USB 3.0 Display Adapter 2. The picture shows the installation process for the 1. GO , select “About This Mac” Ultra Station and select “ More Info…” Device Driver Un-installation 1.
ULTRA STATION USER MANUAL INSTALLATION FOR WORMHOLE GETTING STARTED-MAC 1. Connect one end of the Wormhole Switch to a standard USB port on one of the two computers. And connect the other end of the Wormhole Switch to a USB port on the second computer.
3. 3. After the Wormhole Switch is plugged in the “Wormhole” CDROM icon will appear either on the desktop or on the “Macintosh HD”. Double click on the “Wormhole” icon. 4. When the Wormhole Switch is connected properly the wormhole launch page will be shown.
ULTRA STATION USER MANUAL Troubleshooting: If auto-run is not launched, please follow the steps: A. Insure both computers are properly connected to the USB cable. B. Go to My Computer and double-click the j5 Wormhole Switch icon ( ) to start the application. 4.
Seite 21
Display Resolution Fast Access to Display Resolution setting The resolution list will show when moving the cursor on Display Resolution. Select the resolution you want for the ULTRA STATION. Default resolution: 1024 x 768 x 32 bit Display Orientation The Orientation allows you to turn the display device, which is connected to ULTRA STATION Display Mode...
Seite 22
ULTRA STATION USER MANUAL Mirror mode-Duplicate This feature allows the same contents of on-board screen to be displayed to the screen of ULTRA STATION You can select “Duplicate these displays” and click “Apply” Note: The resolution for the secondary and primary displays must be the same when using Mirror Mode (This may be lower than the preferred resolution for the display).
Seite 23
Super Utility A super utility provides more options. You can find the icon on the lower right task bar. Identify Monitors When “Identify Monitors” is selected, a serial number will be shown at the upper right corner of the display device. You can see the serial number of each display when using the Hotkey function.
ULTRA STATION USER MANUAL Choose “Move Active Window to Display02” check “Move Window and Full screen” and click Apply . Display Setting Fast access to the system “Display Setting” Display Location & Fix Position This function helps you arrange the positions of all the display locations you have set. You will icon on desktop.
Seite 25
If there is no display device attached to the ULTRA STATION, it will show up as “Unknown Monitor.” In some cases, the attached display device does not support EDID, in this case the ID will also show up as “Unknown Monitor”. Display Resolution Default Resolution: 1024 x 768x 32 bit The resolution list will show up when you...
Seite 26
ULTRA STATION USER MANUAL Display Mode Extended (Default Mode) A default display mode allows the attached ULTRA STATION enabled display device to work as an “Extended” display of the on-board screen. Mirror Mode When Mirror is selected, the screen of the display device will be the same as the main display, and Display Rotation will be disabled automatically.
Seite 27
Primary Mode When Primary is selected, the display device When Off is selected it will disable the will become the main display. The display of display of the ULTRA STATION. the internal graphics card will automatically switch to be the extended display and act as an extension desktop.
Seite 28
ULTRA STATION USER MANUAL Multi-Display Control Panel When Multi-Display Control Panel is selected, the Multi-Display Control Panel window will pop-up to enable the modification of the Hotkeys. ※ Using Hotkey Default setting is Ctrl + Display No. Click the window you want to move on task bar to become active, and then press Hotkey.
FUNCTIONS INSTRUTIONS: MAC Display Resolution From “System Preferences” click on the Go to , and then “System “Display” tab. You should see this screen. Preferences On this screen, you can adjust the resolution, display mode and color range. Display Mode Click on the “arrangement”...
Seite 30
ULTRA STATION USER MANUAL TIP: To simplify using the USB Display device click “show display in menu bar.” You will see the display icon that you can double- click on at any time. Windows Arrangement Space Click “Show Spaces in menu bar.” You You can arrange Windows on display by should see the space number on the “Expose &...
Exposé View different windows with a single keystroke. F9 : view all open windows F10: view windows of the current application only F11: show desktop *For more windows arrangement functions, please see Apple’s computer user manual. FUNCTIONS INSTRUTIONS: WORMHOLE Keyboard and Mouse Sharing o Use Mouse to Move Off the Edge of Screen:...
Seite 32
ULTRA STATION USER MANUAL the first computer to type the text on the file of the second computer. Note: 1. Please use a Mouse and Keyboard set. The Keyboard Switch function always follows the mouse cursor of the same computer. When using a USB Mouse or Keyboard that is not a set, it will default to its limited screen switching function mode only.
Seite 33
B. File Shuttle: 1. Once your Windows computer connects to the Android tablet, the File Shuttle will launch automatically and you will see the icon ( ) in the tool bar of Windows computer. 2. The file system of Android tablet will appear in the Windows computer. You will be able to transfer files between the two computers.
Seite 34
ULTRA STATION USER MANUAL Keyboard sharing for iPad This Wormhole Switch also provides a Keyboard sharing for iPad. You can connect a PC and an iPad via the Wormhole Switch and switch the PC’s keyboard to work on the iPad. Due to the lack of a USB port on the iPad, you will need a “USB connection kit”...
Seite 35
(Right/Left/Up/Down) o Disable (Enable) the Keyboard and Mouse Control Temporarily& Disable (Enable) Clipboard Share Temporarily: You can quickly Disable or Enable sharing option. If Disabling one of those functions temporarily, the icon ( ) will be shown.If Disabling both functions temporarily, the icon ( ) will be shown.
Seite 36
ULTRA STATION USER MANUAL The File Shuttle Definition A. The bar description Close Minimize Computer Icon Active Information Option The bar Guider File List Simply Drag a file from your computer to here. The file will copy to the destination of another computer. You can enlarge the window by using the left mouse button and press the title bar to move the whole window.
Seite 37
b. Right click Dock area to choose below action Copy: Copy the selected files and Paste it to the other destination. Remove from Dock: Use Remove from Dock to delete the selected files on the Dock. Select All: Click Select All to select all the files on the Dock, and then copy and paste all the files to the destination Minimize Press...
Seite 38
ULTRA STATION USER MANUAL The list of the device item from the other computer The list record of recent searching path File Destination Path You can quick select the destination by clicking the path. Add Folder Click on the icon to add a new folder and edit the file name. C.
Seite 39
TROUBLE SHOOTING If you have any questions about the use of the JUD500 ULTRA STATION, please follow the instructions below. If any further assistance is needed, please visit our website or call j5 create support hotline. Known Issues Direct 3D is not supported under XP. It would be supported under Win 7 Aero mode. General Recommendations Incompatibilities exist when using other Video over USB Devices on a single system.
2. Online Support Please visit the j5 create website (www.j5create.com) to find the latest software for your device. If you are still experiencing the same issue, you can submit a description of your problem via email service@j5create.com...
Seite 41
If such a situation occurs, j5 create will calculate the cost of materials and repair for your reference. This warranty is given by j5 create in lieu of any other warranties express or implied. REGULATORY COMPLIANCE This equipment has been tested and found to comply with FCC Part 15 Subpart B § 15.109/15.107 Class B. Operation is subject to the following two conditions: •...
Seite 43
Ultra Station Manuel de l'utilisateur JUD500...
Seite 44
Table of Contents Environnements requis ............................. 3 MISE EN ROUTE ................................5 INSTALLATION POUR WINDOWS ..........................6 Installation du pilote ............................6 Vé rification de l'installation du pilote ......................9 Ré gler le son ..............................10 Dé sinstallation du pilote ..........................12 INSTALLATION POUR MAC ............................
2.0 et 3.0. L'Ultrastation contient é galement la solution de technologie Wormhole de j5create pour la copie et le partage de fichiers entre deux ordinateurs par simple glisser- dé poser. La connexion de deux ordinateurs avec un seul câ ble USB3.0, est la solution idé ale pour l'expansion de votre Ultrabook ou Macbook en un poste de travail complet.
Seite 46
d'alimentation Sortie: 5V/4A CC Host (2) Upstream Port Port USB 3.0 (connecteur femelle Micro B) Câ ble USB 3.0 (Type A vers Mini-B) Concentrateur Port en aval (3) Connecteur femelle USB3.0 Type-A avec charge de la batterie Port en aval (4) Connecteur femelle USB 3.0 Type-A Port en aval (10) Connecteur femelle USB 2.0 Type-A...
ULTRA STATION Manuel de l'utilisateur 1024 x 768 16,32 bits 800 x 600 16,32 bits Ethernet (9) Port Ethernet Connecteur Ethernet RJ-45 10/100 Base-T Audio Micro (8) Entré e audio sté ré o 3,5 mm Haut-parleur (7) Sortie audio sté ré o 3,5 mm Wormhole Switch(11) Port Wormhole Connecteur femelle USB 2.0 Mini-B...
1. Lancez l'installation du pilote (veuillez vous ré fé rer à l'installation du systè me d'exploitation de votre PC dans la section suivante) * Remarque: Effectuez l'installation complè te du pilote avant de passer aux é tapes suivantes. 2. Branchez l'adaptateur sur le Port 1 3.
Seite 49
1. La page d'installation sera lancé e. Pour 2. Aprè s avoir appuyé sur l'option commencer installation, cliquez sur d'installation, l'assistant d'installation va se “ Installer le dernier pilote”. Assurez- lancer, cliquez sur Suivant> pour vous que le ré seau est disponible continuer appuyez sur “Installer le pilote”...
Seite 50
Windows 7: Vous pouvez modifier la position correspondante de chaque extension d'affichage via les paramè tres d'affichage. Allez à « DEMARRER » → « Panneau de configuration » → « Apparence et personnalisation » → « Modifier la ré solution de l'é...
Vé rification de l'installation du pilote La procé dure suivante sert à vé rifier l'é tat de l'installation du pilote de la ULTRA STATION Windows 7: Faites un clic droit sur « Poste de travail » « Gé rer » « Gestionnaire de pé...
Ré gler le son Le systè me audio de Microsoft restreint la fonction audio à une sortie à la fois; donc, lorsque vous utilisez l' dispositif USB HDMI multi-affichage, seule une sortie recevra l'audio. Ce qui suit explique comment installer et changer la sortie audio par dé faut du dispositif d'affichage connecté...
Seite 53
Windows XP: 2. Les options de haut-parleur sont indiqué es 1. Allez à «Panneau de configuration> Sons ci-dessous. et pé riphé riques audio» et sé lectionnez «Modifier les paramè tres des haut- parleurs». Remarque: A. Les haut-parleurs sont numé roté s en fonction du nombre de ports USB dé tecté s par votre ordinateur.
Dé sinstallation du pilote ※ Dé branchez le câ ble USB de la ULTRA STATION avant de dé sinstaller le pilote 1. Cliquez sur « Dé marrer » → Panneau de 2. Un message apparaî tra confirmant que vous configuration → Programmes et souhaitez dé...
Seite 55
1. Insé rez le CD de pilotes dans le lecteur de CD-ROM; et exé cutez le fichier .dmg pour charger les pilotes dans le dossier « mac_install » 2. La page d'installation sera lancé e. Pour commencer installation, cliquez sur “ Installer le dernier pilote”. Assurez- vous que le ré...
Seite 56
7. L'installation est terminé e, cliquez sur « 8. Une fois que l'installation du pilote Lan est Fermer » terminé e, Assurez-vous que le ré seau est disponible ou Choisissez la version OS que vous utilisez appuyez sur “Installer le pilote” pour dé...
Ré gler le son Le systè me audio de Mac restreint la fonction audio à une sortie à la fois; donc, lorsque vous utilisez l' USB ULTRA STATION, seule une sortie recevra l'audio. 2. Allez à «Pré fé rences systè me» et 1.
Dé sinstallation du pilote 1. Dé branchez le câ ble USB de la ULTRA STATION du port USB 2. Pour la dé sinstallation, appuyez sur l'icô ne "Dé sinstaller le pilote" 3. Cliquez sur «Ouvrir» pour continuer 4. Cliquez sur «Dé sinstaller et redé marrer» pour continuer 5.
Seite 59
2. Lorsque vous connectez d'abord le commutateur Wormhole Switch à l'ordinateur MAC, une fenê tre pop up affiche, "Assistant de configuration du clavier’’ suivez les é tapes pour sé lectionner le type de clavier. Astuce : Vous pouvez é galement modifier le paramè...
4. Lorsque l'interrupteur Wormhole Switch est connecté correctement, la page de lancement Wormhole Switch s’affiche MISE EN ROUTE-Windows Suivez les é tapes ci-dessous pour configurer le j5 Wormhole Switch: 1. Connectez une extré mité du Wormhole Switch à un port USB standard sur l'un des deux ordinateurs.Branchez l'autre extré...
Seite 61
connecté à Wormhole Switch, la page de lancement wormhole s’affiché . INSTRUCTIONS SUR LES FONCTIONS: WINDOWS 7 ID de l'affichage Dé tection intelligente de l'ID du dispositif d'affichage Le SE Windows 7 prend en charge DDC/EDID VESA. Il sera affiché comme l'ID du dispositif d'affichage chaque fois qu'il est raccordé...
Seite 62
Orientation de l'affichage L'Orientation vous permet d'activer le dispositif d'affichage, qui est connecté à l'ULTRA STATION Mode d'affichage Mode Etendu (Par dé faut) Cette fonctionnalité permet au dispositif d'affichage connecté à l' ULTRA STATION de fonctionner comme un affichage «é tendue» de l'é cran de bord.
Seite 63
simultané ment. Le systè me d’exploitation Windows 7 peut avoir d’autres limites. Mode principal Lorsque vous voulez basculer le moniteur activé comme affichage principal et é tendre la visualisation à l'é cran de bord. Choisissez le «Numé ro» de l'affichage principal que vous voulez voir attribuer et cochez «En faire mon affichage principal».
Seite 64
Panneau de contrô le multi-affichages Cette caracté ristique unique offre une expé rience de travail plus simple pour les environnements multi-é cran. Une sé rie de ré glage de raccourcis clavier aide à se dé placer rapidement entre les dispositifs d'affichage souhaité s. ※Utilisation des raccourcis clavier Le ré...
Position fixe Cette fonction vous aide à organiser les positions de tous les emplacements d'affichage que vous avez dé finis dans Affichage > Ré solution de l'é cran Aprè s «Paramé trage de l'emplacement de l'affichage», Cochez dans cette fonction. Tous les emplacements d'affichage seront fixé...
Seite 66
Display Resolution Ré solution par dé faut: 1024 x 768 x 32 bits La liste des ré solutions apparaî tra lorsque vous dé placez le curseur sur Ré solution d'affichage. Sé lectionnez la ré solution souhaité e. Rotation de l'affichage La Rotation de l'affichage vous permet de tourner le dispositif d'affichage, qui est connecté...
Seite 67
Mode Miroir Lorsque Miroir est sé lectionné , l'é cran du dispositif d'affichage, qui est connecté à l'ULTRA STATION, est le mê me que l'é cran principal, et Rotation de l'affichage est automatiquement dé sactivé . Vous pouvez sé lectionner «Retournement Horizontal», ou «Retournement Vertical ».
Seite 68
Identifier le moniteur Quand Identifier les moniteurs est sé lectionné , un numé ro de sé rie s'affiche dans le coin supé rieur droit du dispositif d'affichage connecté . Vous pouvez utiliser la fonction de Raccourci clavier pour trouver le numé...
Cliquez sur la fenê tre que vous souhaitez dé placer sur la barre des tâ ches pour la rendre active et appuyez sur Raccourci clavier. ※Paramé trer les raccourcis clavier Par exemple: Dé placez la fenê tre sur Affichage03, et agrandissez-la automatiquement en plein é...
Seite 70
Mode d'affichage Cliquez sur l'onglet «organisation», et dé cochez «Affichage miroir» pour dé sactiver la mise en miroir de l'é cran. Vous verrez automatiquement une autre fenê tre apparaî tre à l'é cran qui repré sente l'Ultra station Vous pouvez dé placer la barre de menu sur n'importe quel affichage pour attribuer n'importe quel affichage au Principal.
F8: vous pourrez voir la Disposition des espaces avec une seule touche. Vous pouvez dé placer n'importe quelle fenê tre sur un autre espace. Exposé Afficher diffé rentes fenê tres avec une seule touche. F9: afficher toutes les fenê tres ouvertes ...
Seite 72
Basculez l'utilisation du clavier sur un autre ordinateur Dé placez le curseur de la souris vers le deuxiè me ordinateur et ouvrez une application d'é dition telle que Word, Excel et Power Point, etc et utilisez le clavier du premier ordinateur pour taper le texte sur le fichier du deuxiè...
Seite 73
vous pouvez é galement procé der comme suit pour transfé rer des fichiers entre deux ordinateurs. B. Navette fichier: 1. Une fois votre ordinateur sous Windows se connecter à la tablette Android, la navette de fichiers se lancera automatiquement et vous verrez l'icô ne ( dans la barre d'outils de Windows ordinateur.
Par exemple, lorsque vous souhaitez copier le contenu d'un ordinateur Mac OS et coller le contenu OS Windows Computer suivre les é tapes ci-dessous: 1. Si vous utilisez un clavier pour Mac OS, vous devez appuyer sur la "Commande + C" clé...
Seite 75
o Navette Fichier(File Shuttle): Navette fichier est une opé ration conviviale et simple avec une interface de donné es du logiciel de transmission, qui combine la transmission haute vitesse avec les exigences non techniques. Navette fichier vous permet de facilement transfé rer et partager des donné...
Seite 76
1. S'il vous plaî t, assurez-vous que le ré seau est disponible et ne dé branchez rien pendant la mise à jour du pilote. 2. Retirez le câ ble de l'ordinateur esclave 3. Sélectionnez ‘’mise à jour en ligne" 4. Lorsque vous avez terminé la fiche processus d'installation dans le dispositif à deux ordinateurs.
Seite 77
né cessaire avec sobrié té . a. Il suffit de glisser tous les fichiers dont vous avez besoin dans le Dock b. Sur la zone droite du quai cliquez pour choisir les actions ci-dessous Copie:Copiez les fichiers sé lectionné s et le coller à l'autre destination. Supprimer du Dock:Utilisez Supprimer du Dock pour supprimer les fichiers sé...
Seite 78
La liste de l'é lé ment pé riphé rique des autres ordinateurs Le chemin listé des recentes recherches Chemin Destination fichier Vous pouvez rapidement sé lectionner la destination en cliquant sur le chemin. Ajouter un dossier Cliquez sur l'icô ne pour ajouter un nouveau dossier et modifier le nom du fichier.
DEPANNAGE Si vous avez des questions concernant l'utilisation de la JUD500 Ultra Station, veuillez suivre les instructions ci-dessous. Si une aide supplé mentaire est né cessaire, visitez notre site Web ou appelez l'assistance en ligne de j5 create. Problè mes connus - Direct 3D n'est pas pris en charge sous XP.
Seite 80
de certains formats vidé o. Utilisez le lien ci-dessous pour installer le codec mé dia gratuit. K- Lite: http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm Les lecteurs Vidé o/Mé dia ont diffé rentes capacité s de dé codage sous diffé rents modes d'affichage. Pour une meilleure performance de visualisation des DVD ou de certains formats vidé...
2. Support en ligne Visitez le site Web de j5 create (www.j5create.com) pour trouver la derniè re version du logiciel pour votre appareil. Si vous rencontrez toujours le mê me problè me, vous pouvez soumettre une description du problè me par email à service@j5create.com.
Seite 82
du produit. Cette garantie ne s'applique pas : (a) à des piè ces consommables, à moins que le dommage ne soit dû à un dé faut de maté riaux ou de fabrication; (b) aux dommages cosmé tiques, y compris mais non limité aux rayures, entailles, et plastique cassé sur les ports; (c) les dommages causé...
Seite 83
Ultra Station Bedienungsanleitung JUD500...
Seite 84
Table of Contents ERSTE SCHRITTE ..........................5 INSTALLIEREN BEI WINDOWS ......................6 Installieren des Gerä tetreibers .................... 6 Prüfen der Gerä tetreiberinstallation .................. 9 Einrichten des Klangs......................10 Deinstallieren des Gerä tetreibers ..................12 INSTALLIEREN BEI MAC.........................13 Installieren des Gerä tetreibers ..................13 Einrichten des Klangs......................15 Prüfen der Gerä...
Mikrofone und andere USB 2.0 und 3.0 Peripheriegerä te. Die Ultrastation verfügt ebenfalls ü ber die j5create Wormhole Technologie für das Kopieren und Teilen von Dateien auf zwei Computern durch einfaches Ziehen und Ablegen. Der Anschluss von zwei Computern mit nur einem USB 3.0 Kabel ist die perfekte Lö...
Seite 86
Stromversorgung Selbst versorgt Netzadapter Eingang: AC 100-240V, 50~60 Hz Ausgabe: DC 5V/4A Host (2) Upstream-Anschluss USB 3.0-Anschluss ( Mini-B, Buchse) Kabel USB 3.0, Micro B auf Type A Downstream- USB 3.0-Anschluss (Typ-A, Buchse) mit Akkuladung Anschluss (3) Downstream- USB 3.0-Anschluss (Typ-A, Buchse) Anschluss (4) Downstream- USB 2.0-Anschluss (Typ-A, Buchse)
1. Beginnen Sie mit der Installation des Gerä tetreibers (wä hlen Sie dazu die Beschreibung, die für das Betriebssystem Ihres PCs geeignet ist). * Hinweis: Installieren Sie zuerst den Treiber erst vollstä ndig, bevor Sie weitere Schritte ausführen. 2. Schließen Sie den Netzadapter an Anschluss 1 an 3.
Seite 89
ULTRA STATION Benutzerhandbuch 1. Die Installationsseite wird gestartet. Um die 2. Jetzt wird der InstallShield Wizard Installation zu starten, klicken Sie auf “ Den (Installationsassistent) gestartet. Klicken Sie neuesten Treiber installieren”. Stellen Sie zum Fortfahren auf Next> (Weiter). sicher, dass das Netzwerk verfügbar ist, oder klicken sie auf “...
Seite 90
Mö glicherweise wird jetzt das Spiegelbild des Hauptmonitors auf dem Anzeigegerä t angezeigt. Windows 7: Sie kö nnen die jeweilige Position jedes Anzeigegerä ts ü ber die Anzeigeeinstellungen ä ndern. Gehen Sie zu “START” → “Systemsteuerung” → “Darstellung und Anpassung” → “Bildschirmauflö...
ULTRA STATION Benutzerhandbuch verschieben Hinweis: Wenn die interne Grafikkarte zwei Monitore unterstützt….. Wenn Sie eine Newport Station verwenden Das Anzeigegerä t, das an den zweiten VGA- Anschluss angeschlossen ist, wird als 3 Monitor bezeichnet. Das Anzeigegerä t, das an die Newport Station angeschlossen ist, ist der 2 Monitor.
Einrichten des Klangs Das Audiosystem von Microsoft beschrä nkt die Audiofunktion auf jeweils nur einen Ausgang. Wenn Sie den USB -Mehrmonitoradapter verwenden, kann daher nur ein Ausgang Audio empfangen. Nachfolgend wird beschrieben, wie Sie die Standard-Klangausgabe des an den USB 3.0 ULTRA STATION angeschlossenen Anzeigegerä...
Seite 93
ULTRA STATION Benutzerhandbuch Soundoptionen. Wählen Sie dann “Test”, und wä hlen Sie einen Lautsprecher für die Standardausgabe aus. Windows XP: 1. Gehen Sie zu “Systemsteuerung> 2. Die Lautsprecheroptionen werden unten Sounds, Sprache und Audiogerä te”, und gezeigt. wählen Sie “Lautsprechereinstellungen ä...
Deinstallieren des Gerä tetreibers ※ Trennen Sie das USB-Kabel der ULTRA STATION ab, bevor Sie den Treiber deinstallieren. 1. Klicken Sie auf “Start” → 2. Eine Meldung erscheint, mit der Sie Systemsteuerung → Programme und aufgefordert werden, die Deinstallation des Funktionen →...
ULTRA STATION Benutzerhandbuch 3. Wenn der Treiber fertig deinstalliert wurde, wählen Sie “Ja, ich mö chte meinen Computer jetzt neu starten”. Klicken Sie auf Fertig stellen, um den Computer neu zu starten. INSTALLIEREN BEI MAC Installieren des Gerä tetreibers Durch die Installation des Gerä tetreibers kann das Betriebssystem des Computers die ULTRA Station erkennen.
Seite 96
4. Klicken Sie zum Fortfahren auf 5. Click “ Install” to proceed “Akzeptieren”. Klicken Sie zum Fortfahren auf “Installieren”. 6. Geben Sie Ihr Passwort ein, und klicken Sie Die Software wird installiert… Das kann einen Moment dauern. auf “OK”. 7. Wenn die Installation abgeschlossen ist, 8.
ULTRA STATION Benutzerhandbuch 9. Klicken Sie zum Fortfahren auf “Fortfahren” 10. Geben Sie Ihr Passwort ein, und klicken Sie 11. Klicken Sie auf “Installation fortsetzen” auf “OK”. 12. Die Software wird installiert… Das kann 13. Klicken Sie auf “Neustart”, um die einen Moment dauern.
2. Gehen Sie zu den “Systemeinstellungen”, und 1. Gehen Sie zu , und wä hlen Sie wä hlen Sie “Sound”. dann “Systemeinstellungen” Die Optionen für die “Ausgabe” des Lautsprechers werden unten beschrieben. Wä hlen Sie ein Gerä t für die Soundausgabe durch Anklicken aus.
ULTRA STATION Benutzerhandbuch Deinstallieren des Gerä tetreibers 1. Trennen Sie das USB-Kabel der ULTRA STATION vom USB- Anschluss ab. 2. Um den Treiber zu deinstallieren, klicken Sie auf das Symbol “ Treiber deinstallieren” 3. Klicken Sie zum Fortfahren auf 4. Klicken Sie auf “Deinstallieren und neu starten” “Ö...
INSTALLIEREN BEI WORMHOLE ERSTE SCHRITTE-MAC 1. Führen Sie die folgenden Schritte aus, um den j5 Wormhole Switch zu konfigurieren Schließen Sie das eine Ende des Wormhole Switch an einen USB-Standardanschluss des einen Computers an,Schließen Sie das andere Ende des Wormhole Switch an einen USB-Standardanschluss des zweiten Computers an 2.
ULTRA STATION Benutzerhandbuch 3. Nachdem der Wormhole-Schalter in das “Wormhole” eingesteckt ist, wird das CDROM -Symbol entweder auf dem Desktop oder in der “Macintosh HD” auftauchen. Dann Doppelklick auf das “Wormhole” -Symbol. 4. Wenn der Wormhole Switch richtig verbunden ist, wird die Startseite auftauchen.
Seite 102
zu starten ( ) (siehe Abbildung unten). 4. Wenn das Fenster “Benutzerkontensteuerung” auf dem Bildschirm erscheint, klicken Sie zum Fortfahren auf “Ja”. 5. Wenn der Wormhole Switch richtig verbunden ist, wird die Startseite auftauchen. INSTRUCTIONS SUR LES FONCTIONS: WINDOWS 7 ID de l'affichage Dé...
Seite 103
ULTRA STATION Benutzerhandbuch Orientation de l'affichage L'Orientation vous permet d'activer le dispositif d'affichage, qui est connecté à l'ULTRA STATION Mode d'affichage Mode Etendu (Par dé faut) Cette fonctionnalité permet au dispositif d'affichage connecté à l'ULTRA STATION de fonctionner comme un affichage «é...
Seite 104
Mode principal Lorsque vous voulez basculer le moniteur activé comme affichage principal et é tendre la visualisation à l'é cran de bord. Choisissez le «Numé ro» de l'affichage principal que vous voulez voir attribuer et cochez «En faire mon affichage principal».
Seite 105
ULTRA STATION Benutzerhandbuch Panneau de contrô le multi-affichages Cette caracté ristique unique offre une expé rience de travail plus simple pour les environnements multi-é cran. Une sé rie de ré glage de raccourcis clavier aide à se dé placer rapidement entre les dispositifs d'affichage souhaité...
Position fixe Cette fonction vous aide à organiser les positions de tous les emplacements d'affichage que vous avez dé finis dans Affichage > Ré solution de l'é cran Aprè s «Paramé trage de l'emplacement de l'affichage», Cochez dans cette fonction. Tous les emplacements d'affichage seront fixé...
Seite 107
ULTRA STATION Benutzerhandbuch Ré solution d'affichage Ré solution par dé faut: 1024 x 768 x 32 bits La liste des ré solutions apparaî tra lorsque vous dé placez le curseur sur Ré solution d'affichage. Sé lectionnez la ré solution souhaité e. Rotation de l'affichage La Rotation de l'affichage vous permet de tourner le dispositif d'affichage, qui...
Seite 108
Mode Miroir Lorsque Miroir est sé lectionné , l'é cran du dispositif d'affichage, qui est connecté à l'Adaptateur d’affichage USB3.0, est le mê me que l'é cran principal, et Rotation de l'affichage est automatiquement dé sactivé . Vous pouvez sé lectionner «Retournement Horizontal», ou «Retournement Vertical ».
Seite 109
ULTRA STATION Benutzerhandbuch Panneau de contrô le multi-affichages Lorsque Panneau de contrô le multi- affichages est sé lectionné , la fenê tre du panneau de contrô le multi-affichages apparaî t afin de permettre la modification des raccourcis clavier. ※Utilisation des raccourcis clavier Le ré...
Paramé trage de l'affichage Accè s rapide au systè me «Paramé trage de l'affichage» INSTRUCTIONS SUR LES FONCTIONS: MAC Ré solution d'affichage Dans «Pré fé rences Systè me», cliquez sur l'onglet «Affichage». Vous devriez voir cet é cran. Aller à , puis «Pré...
Seite 111
ULTRA STATION Benutzerhandbuch Mode d'affichage Cliquez sur l'onglet «organisation», et dé cochez «Affichage miroir» pour dé sactiver la mise en miroir de l'é cran. Vous verrez automatiquement une autre fenê tre apparaî tre à l'é cran qui repré sente l' USB ULTRA STATION ...
F8: vous pourrez voir la Disposition des espaces avec une seule touche. Vous pouvez dé placer n'importe quelle fenê tre sur un autre espace. Exposé Afficher diffé rentes fenê tres avec une seule touche. F9: afficher toutes les fenê tres ouvertes F10: afficher les fenê...
Seite 113
ULTRA STATION Benutzerhandbuch Schieben Sie den Cursor auf den zweiten Computer, und ö ffnen Sie dort eine beliebige Anwendung wie Word, Excel, Power Point usw. Jetzt kö nnen Sie mit der Tastatur des ersten Computers Text in die Datei des zweiten Computers eingeben Anmerkung: 1.
Seite 114
Dateiübertragung o Drag und Drop Es ist sehr einfach und geht schnell, Dateien zwischen zwei Computern zu ü bertragen. Dazu mü ssen die Dateien oder Ordner nur mit dem Cursor auf den anderen Computer verschoben werden. Neben der Verschiebemethode kö nnen Dateien auch auf die folgende Art zwischen zwei Computern ü...
Seite 115
ULTRA STATION Benutzerhandbuch 3. Verschieben Sie den Cursor in die Position, in der die Datei eingefügt werden soll. Drücken Sie dann die Tastenkombination (Strg+V), um die kopierten Dateien auf dem anderen Computer einzufügen. Anmerkung: Bitte nutzen Sie die originale Syste-Hotkey-Einstellung auf Ihrem Computer- Betriebssystem (das Keyboard folgt immer dem Maus-Cursor).
Seite 116
SOFTWAREANWEISUNGEN Beschreibung des Wormhole Switch-Symbols Um die Installation zu starten, klicken Sie auf das Wormhole Switch-Symbol ( ) in der unteren rechten Ecke des Bildschirms. MAC OS: Windows OS: o Ü ber j5 Wormhole Switch: Hier werden die wichtigsten Informationen zum j5 Wormhole Switch angezeigt. o Datei-Shuttle (File Shuttle): Datei-Shuttle ist eine nutzerfreundliche und simple Bedienung für die Datenübertragungsschnittstelle, welche Hochgeschwindigkeitsübertragung...
Seite 117
Das Entticken dieser Einstellung bedeutet, dass die Startseite nicht auftauchen wird, wenn Sie das Gerä t starten. * Diese Option ist nur auf Mac OS-Computern verfügbar -Diese Anwendung ansiedeln Bei dieser Einstellung wird die Wormhole Switch-Anwendung automatisch eingerichtet, sobald das Gerä t angeschlossen wird. -Zugang für System-Hotkey aktivieren Wä...
Seite 118
Definition des Datei-Shuttles A. Die Leistenbeschreibung Sie kö nnen das Fenster vergrö ßern, indem Sie den linken Mausknopf nutzen und die Titelleiste ü ber das agze Fenster verschieben. Schließ en Verkleinern Computer-Symbol Aktive Information Option Leiste Guider Detailliste Ziehen Sie einfach eine Datei von dem Computer hier hin. Die Datei wird in den Zielordner verschoben o Computer-Symbol:Zeigt das Desktop-Bild des anderen Computers.
Seite 119
b. Rechter Klick auf den Dockbereich, um eine der unten stehenden Aktionen auszuwä hlen Kopieren: Kopieren Sie die ausgewä hlten Dateien und fügen Sie sie in einem anderem Zielort ein. Aus dem Dock entfernen: Nutzen Sie Aus dem Dock entfernen, um die ausgesuchten Dateien aus dem Dock zu lö...
C. Dateillistenbeschreibung Rechter Mausklick auf eine Datei auf der Dateiliste und das Ausklappmenü wird erscheinen. Ö ffnen Rechter Klick auf die Datei und Ö ffnen auswä hlen, um die gewünschte Datei aufzumachen oder Doppelklick auf die Datei, um sie schneller zu ö...
deinstalliert wurden, bevor Sie j5 create installieren. Prü fen Sie, ob das Gerä t richtig an das Host-System angeschlossen wurde. Stellen Sie sicher, dass der USB-Anschluss der Ultra Station verwendet wird. Trennen Sie das USB-Kabel des USB-Anzeigegerä ts ab, und schließen Sie es wieder an. Prü...
Sie sich zunä chst sorgfä ltig das Benutzerhandbuch durchlesen. 2. Online-Hilfe Auf der Website von j5 create (www.j5create.com) finden Sie die neueste Software für Ihr Gerä t. Wenn das Problem weiterhin bestehen bleibt, kö nnen Sie eine E-Mail an service@j5create.com senden, in der Sie Ihr Problem...
Seite 123
j5 create garantiert nicht fü r einen ununterbrochenen und fehlerfreien Betrieb des Produkts. j5 create ist nicht haftbar fü r Schä den, die aus der Nichtbeachtung der Anweisungen zur Verwendung des Produkts resultieren. Diese Garantie umfasst nicht: (a) Verschleißteile, wenn der Schaden nicht auf Material- und Herstellungsfehler zurü...
Seite 124
Ultra Station Manual del usuario JUD500...
Seite 125
ULTRA STATION Manual del usuario Table of Contents PRIMEROS PASOS .......................... 5 INSTALACIÓ N PARA WINDOWS ....................7 Instalació n del controlador del dispositivo ..............7 Verificar la instalació n del controlador del dispositivo ..........9 Ajustar el sonido........................10 Desinstalació...
Seite 126
USB2.0 y 3.0. Las Ultraestació n tambié n incluye tecnologí a Wormhole de j5create para copiar y compartir archivos entre dos ordenadores simplemente arrastrando y soltando. Conectar dos ordenadores con un ú nico cable USB3.0, es la solució n perfecta para convertir su Ultrabook o Macbook en una estació...
Seite 127
ULTRA STATION Manual del usuario Host (2) Puerto de subida Puerto USB 3.0 (conector hembra Micro B) Cable USB 3.0 Micro B a Type A Puerto de bajada USB 3.0 (conector hembra Type-A) con cargador de baterí a Puerto de bajada USB 3.0 (conector hembra Type-A) Puerto de bajada USB 2.0 (conector hembra Type-A)
ULTRA STATION Manual del usuario 1024 x 768 16,32 bits 800 x 600 16,32 bits Ethernet (9) Puerto Ethernet Conector 10/100 Base-T Ethernet RJ-45 Audio Micró fono (8) Entrada de audio esté reo de 3,5mm Altavoz (7) Salida de audio esté reo de 3,5mm Wormhole Switch (11) Puerto Wormhole USB 2.0 (conector hembra Mini-B)
Seite 129
ULTRA STATION Manual del usuario 1. Inicie la instalació n del controlador del dispositivo (consulte la instalació n en el sistema operativo de su PC en la secció n siguiente) * Nota: Instale el controlador por completo antes de seguir estos pasos. 2.
ULTRA STATION Manual del usuario INSTALACIÓ N PARA WINDOWS Instalació n del controlador del dispositivo Esta secció n ilustra una guí a sencilla de instalació n de los controladores para el sistema operativo Windows. Cuando su ordenador esté listo inserte el CD de controladores (Driver CD) en la unidad de CD-ROM.
Seite 131
ULTRA STATION Manual del usuario Windows XP : Verá el icono ( ) en la barra de tareas en la esquina inferior derecha. La imá genes de los mensajes siguientes muestran que el software del controlador ha sido instalado con é xito. Las funciones de Pantalla de la Ultra Station se activará...
ULTRA STATION Manual del usuario “identificar” Arrastre el monitor hasta la ubicació n deseada. Nota: Si su tarjeta gráfica interna tiene puertos de pantalla duales….. Cuando utilice un ULTRA STATION El dispositivo de pantalla que esté conectado al 2 puerto VGA será numerado como monitor 3 , el dispositivo de pantalla conectado al ULTRA STATION será...
ULTRA STATION Manual del usuario Ajustar el sonido El sistema de audio de Microsoft restringe la funció n del audio a una salida al mismo tiempo; por tanto, cuando utiliza el dispositivo de multipantalla USB HDMI só lo una salida recibirá...
Seite 134
ULTRA STATION Manual del usuario Windows XP: 2. Las opciones de altavoces se muestran a 1. Vaya a “Panel de control > Dispositivos continuació n. de sonido, voz y audio” u seleccione “Cambiar la configuració n del altavoz”. Nota: A. Los altavoces está n numerados según el número de puertos USB detectados en el sistema.
ULTRA STATION Manual del usuario Desinstalació n del controlador de dispositivo ※ Desenchufe el cable USB de la Ultra Station antes de desinstalar el controlador 1. Haga clic en “Inicio” → Panel de 2. Aparecerá un mensaje confirmando que control → Programas y desea desinstalar la aplicació...
Seite 136
ULTRA STATION Manual del usuario 1. Inserte el CD de controladores en la unidad de CD-ROM y ejecute el archivo .dmg para cargar los controladores en la carpeta “mac_install” 2. Para iniciar la instalació n haga clic en “Instalar el último controlador”. Asegúrese de que la red esté...
Seite 137
ULTRA STATION Manual del usuario 8. La instalació n se ha completado, haga 9. Tras finalizar la instalació n del controlador clic en “Cerrar” Lan, elija laversió n del SO que utiliza y presione “Instalar controlador” para iniciar la instalació n 10.
ULTRA STATION Manual del usuario 13. La instalación está procesándose… 14. Haga clic en “Reiniciar” para completar Tardará unos momentos la instalació n del software Ajustar el sonido El sistema de sonido de Mac restringe la funció n del audio a una salida a la vez; por tanto, cuando utilice el ULTRA STATION USB HDMI só...
ULTRA STATION Manual del usuario Verificar la instalació n del controlador del dispositivo El procedimiento siguiente le ayudará a verificar el estado de la instalació n del controlador del USB Display Adapter 2. La imagen siguiente mostrará el proceso de 1.
ULTRA STATION Manual del usuario INSTALACIÓ N PARA WORMHOLE PRIMEROS PASOS –MAC 1. Conecte un extremo del Wormhole Switch a un puerto USB está ndar de uno de los dos ordenadores.Conecte el otro extremo del Wormhole Switch a un puerto USB del otro ordenador. 2.
ULTRA STATION Manual del usuario 3. Una vez que el Wormhole Switch está conectado, el icono “Wormhole” CDROM aparece ya sea en el escritorio o en el “Macintosh HD”. Haga clic dos veces en el icono “Wormhole” 4. Cuando el Wormhole Switch está conectado de forma correcta aparece la pá...
ULTRA STATION Manual del usuario Wormhole Switch para iniciar la aplicació n ( ). Ver la imagen siguiente. 4. Si la ventana “Control de cuentas de usuario” aparece en la pantalla, haga clic en “Sí ” para continuar. 5. Cuando el Wormhole Switch está conectado de forma correcta aparece la pá...
Seite 143
ULTRA STATION Manual del usuario Orientació n de pantalla La Orientació n le permite girar el dispositivo de pantalla, conectado al ULTRA STATION Modo de pantalla Modo Extendido (Predeterminado) Esta caracterí stica permite al dispositivo de pantalla conectado al Ultra Station funcionar como pantalla en modo “extendido”...
Seite 144
ULTRA STATION Manual del usuario Modo primario Cuando desee convertir el monitor activado como pantalla principal y extender la vista en la pantalla incorporada. Elija el “Número” de la pantalla que desea que sea la principal y marque la casilla “Convertir en pantalla principal”.
Seite 145
ULTRA STATION Manual del usuario Control Panel con multi-pantalla Esta caracterí stica única ofrece una experiencia de trabajo má s simple para entornos multipantalla. Una serie de teclados de acceso directo ayuda a moverse rá pidamente entre los dispositivos deseados. ※Usar teclado de acceso directo La configuració...
ULTRA STATION Manual del usuario Ajustar posició n Esta funció n le ayuda a ordenar la posició n de todas las pantallas ajustadas en Pantalla > Resolución de la pantalla. Tras la “Configuració n de la ubicació n de pantalla”, “marque” en esta funció...
Seite 147
ULTRA STATION Manual del usuario Resolució n de la pantalla Resolució n predeterminada: 1024 x 768 x 32 bits La lista de resoluciones aparecerá cuando mueva el cursor por Resolució n de la pantalla. Seleccione la resolució n deseada. Rotació n de pantalla La Rotació...
Seite 148
ULTRA STATION Manual del usuario Modo Mirror Cuando selecciona Mirror, la pantalla del dispositivo de pantalla, conectada al USB Display Adapter, será la misma que la pantalla principal y Rotació n de pantalla será deshabilitada automá ticamente. Puede seleccionar “Voltear Horizontalmente”...
Seite 149
ULTRA STATION Manual del usuario Control Panel con multi-pantalla Cuando seleccione Control Panel con multi- pantalla, aparecerá la ventana Control Panel con multi-pantalla para permitir la modificació n del teclado de acceso directo. ※ Usar teclado de acceso directo La configuració n predeterminada es Ctrl + Nº de pantalla. Haga clic en la ventana que desee mover en la barra de tareas para que se active y luego presione Teclado de acceso directo.
Seite 150
ULTRA STATION Manual del usuario Configuració n de la pantalla Acceso rá pido a la “Configuración de la pantalla”...
ULTRA STATION Manual del usuario INSTRUCCIONES DE LAS FUNCIONES: MAC Resolució n de la pantalla En “Preferencias del sistema” haga clic en la Vaya a y luego a ficha “Pantalla”. Deberí a ver esta pantalla. “Preferencias del sistema En esta pantalla puede ajustar la resolució n, el modo de pantalla y el rango del color.
Seite 152
ULTRA STATION Manual del usuario CONSEJO: Para simplificar el uso del UltraStation haga clic en “mostrar pantalla en la barra de menús. Verá el icono de la pantalla y podrá hacer doble clic en é l en cualquier momento. Organizació n de Windows ...
ULTRA STATION Manual del usuario Exposé Ver diferentes ventanas con só lo pulsar una tecla. F9 : ver todas las ventanas abiertas F10: ver só lo las ventanas de la aplicació n actual F11: mostrar escritorio *Para má...
Seite 154
ULTRA STATION Manual del usuario Mueva el cursor del rató n a un segundo ordenador y abra una aplicació n de edició n como word, excel y power point, etc. y utilice el teclado del primer ordenador para escribir el texto en el archivo del segundo ordenador Nota: 1.
Seite 155
ULTRA STATION Manual del usuario Transferencia de archives A. Arrastrar y Soltar Es un modo rá pido y fá cil de transferir archivos entre 2 ordenadores. Simplemente arrastre y suelte el archivo o carpeta a los otros ordenadores. Ademá s de usar el mé todo de arrastrar y soltar, tambié n puede hacer lo siguiente para transferir los archivos entre los dos ordenadores.
Seite 156
ULTRA STATION Manual del usuario 1. Haga clic en los archivos que desee copiar y presione las teclas (Ctrl+C) 2. Mueva el cursor al otro ordenador 3. Mueva el cursor a la ubicació n donde desee colocar los archivos y presiones las teclas (Ctrl+V) para pegar los archivos copiados en otro ordenador.
Seite 157
ULTRA STATION Manual del usuario INSTRUCCIONES DEL SOFTWARE Para iniciar la configuració n, haga clic en el icono de la utilidad Wormhole Switch ( en la esquina inferior derecha de la pantalla. MAC OS: Windows OS: o Transferencia de Archivos: Transferencia de Archivos es una operació...
Seite 158
ULTRA STATION Manual del usuario *Esta opció n está disponible ú nicamente para Ordenadores Mac OS -Haga doble clic en el icono de la bandeja del sistema para encender o apagar Compartir temporalmente Esta configuració n le ayuda a habilitar o deshabilitar compartir portapapeles y las funciones de control del KM simplemente haciendo doble clic en el icono del j5 Wormhole Switch ( ) en la esquina inferior derecha de la barra de tareas.
Seite 159
ULTRA STATION Manual del usuario La Definició n de la Transferencia de Archivos(File Shuttle) A. Descripció n de la barra Cerrar Minimiza Í cono del ordenador Informació n activa Opció n La barra Guí a Lista de Archivos Simplemente arrastre un archives desde su ordenador hasta acá . El archivo se copiará...
Seite 160
ULTRA STATION Manual del usuario b. Clic derecho en el á rea Dock para escoger la acció n siguiente Copiar:Copiar el archivo seleccionado y Pegar el archivos en otro destino. Eliminar del Muelle:Use Eliminar del Muelle para borrar los archivos seleccionados del Muelle.
Seite 161
ULTRA STATION Manual del usuario *La lista del í tem del dispositivo del otro ordenador **La lista de registro de trayectorias de bú squeda recientes Trayectoria de Destino Final Puede seleccionar rá pidamente el destino hacienda clic en la trayectoria. Añadir Carpeta Clic en el í...
ULTRA STATION Manual del usuario SOLUCIÓ N DE PROBLEMAS Si tiene preguntas sobre el uso de la JUD500 ultrastation, siga las instrucciones siguientes. Si necesita má s ayuda, visite nuestra pá gina web o llame a la lí nea directa de soporte de j5 create.
Visite el sitio web j5 create (www.j5create.com) para encontrar el ú ltimo software para su dispositivo. Si el mismo problema persiste, puede enviar una descripció n de é ste por correo electró nico a service@j5create.com. El equipo de soporte té cnico de j5 create le contestará en las 24 horas siguientes.
Seite 164
ULTRA STATION Manual del usuario El usuario deberá llamar o enviar un correo electró nico al servicio al cliente de j5 create con informació n sobre el defecto del producto y obtendrá un nú mero de autorizació n de devolució n. Los usuarios se hacen responsables del coste de la devolució...
Seite 166
For MAC&Windows ドッキングステーション flute Ultra Station JUD500 ユーザー マニュアル JUD500 V1.0...
Seite 167
Table of Contents 使ってみましょう ............................5 Windows のインストール .......................... 6 デバイス ドライバーのインストール ................... 6 デバイス ドライバーのインストール点検 ................. 8 サウンドの設定 ........................... 9 デバイス ドライバーのアンインストール ................11 MAC のインストール ..........................12 デバイス ドライバーのインストール ..................12 “ドライ をクリックして先へ進んでください。 ................14 サウンドの設定 ..........................15 デバイス...
Seite 169
ケーブル USB 3.0 Micro B (A タイプ) ハブ ダウンストリーム ポ USB 3.0 コネクター (A タイプ メス) 充電付き ート(3) ダウンストリーム ポ USB 3.0 コネクター (A タイプ メス) ート(4) ダウンストリーム ポ USB 2.0 コネクター (A タイプ メス) ート(10) ビデオ VGA ポート (5) DB 15 ピン...
Seite 185
機能説明: Windows 7 画面 ID:表示装置 ID の検出 Window 7 OS は VESA DDC (EDID) をサポートして います。 このサポートにより、Ultra Station に接続 されていればいつでも表示装置 ID を検出すること が可能です。 解像度 解像度設定へすばやくアクセス カーソルを解像度の上に移動すると、画面解像度の リストが表示されます。 Ultra Station に使用したい 解像度を選択します。 初期設定の解像度: 1024 x 768 x 32 ビット 画面の向き 向きから、Ultra Station に接続している表示装置の 画面の表示の向きを回転して変えることができま...
Seite 186
表示モード 拡張表示モード (初期設定) この機能により、Ultra Station に接続している表示装置 を、メイン PC 画面 (メイン ディスプレイ) の “拡張” ディ スプレイとして使用することができます。 まず、ディスプレイの “ず、デ をクリックして拡張させる表 示装置を決め、 “クリックして拡張させる表 を選んで “を 選ん をクリックします。 ミラー モード-画面の複製 この機能により、メイン PC の画面と同じ内容をUltra Station の画面に表示することができます。 “これらの画面へ複製する” を選んで “適用” をクリックし ます。 注意: ミラー モードの使用時、セカンダリ ディスプレイとプライマリ ディス プレイの解像度が同じである必要があります(これはディスプレイの...
機能説明:Windows XP どの機能も、画面右下のツールバーにあるアイコン ( ) をクリックするだけで簡単・ダイレクトに選択が できます。 画面 ID 表示装置 ID の検出 USB ULTRA STATION は VESA DDC (EDID) をサポートしています。このサポートにより、USB ULTRA STATION に接続されていればいつでも 表示装置 ID を検出することが可能です。 ディスプレイが 1 つも USB ULTRA STATIONに接続していない場合、ID は “識別できないモニター” とし て表示されます。接続したディスプレイが EDID をサポートしていない場合もあります。その場合もディスプ レイの ID は “識別できないモニター” として表示されます。 解像度...
トラブルシューティング すでに知られている問題 Direct 3D は XP ではサポートされていません。 これは Windows 7 の Aero モード以上でサポートされています。 一般的な推奨事項 単一のシステム上で USB デバイスを介して他のビデオ機器を使用する場合、互換性の問題が常に存在します。 j5 create のイ ンストールを続行する前に、必ず USB デバイス接続の他のビデオ機器がすべてアンインストールされていることをご確認くださ い。 また、デバイスがホスト システムに正しく接続されているかチェックしてください。 お使いの USB ポートが Ultra Station であることもご確認ください。 USB ディスプレイ デバイスの USB ケーブルを抜き、再度差し込んでください。 モニターが正しく接続されて電源がオンになっているかどうか、ご確認ください。 ドライバーのインストール後に、必ずコンピューターを再起動してください。 別の USB ポートやコンピューターで試してみてください。 ほかの...
Seite 205
ULTRA STATION 使用手冊 Table of Contents GETTING STARTED ..........................6 WINDOWS 安裝 ............................7 安裝流程 .............................. 7 確認安裝狀態 ............................9 設定音效 ............................10 移除流程 ............................12 MAC 安裝流程 ............................12 安裝流程 ............................12 設定音效 ............................15 確認安裝狀態 ............................ 16 移除流程 ............................16 WORMHOLE 安裝流程...
Seite 206
ULTRA STATION 使用手冊 透過聰明方便的Ultra Station,USB3.0介面主機擴充中心,您可以快速的增加以HDMI或VGA為介面的 第二台螢幕。兩台主機,只需要各一條USB3.0/USB2.0,擴充您的螢幕,鍵盤,滑鼠游標,網路卡,喇 叭及麥克風。此外,Ultra Station內建超讚的"蟲洞穿梭"功能,可快速的在兩台電腦中間輕易的複製與 共享您的資料與文件。Ultra Station是一個全方位的工作站,是擴展您Ultrabook與MacBook®完美的 解決方案,增加您與主機之間跨平台的多工力與生產力! 電腦環境需求 支援 Microsoft Windows 7, XP (32-bit or 64-bit) 支援Mac OS 10.6 雪豹 Snow Leopard USB埠(建議USB 3.0 ) 系統規格需求 CPU處理器: Intel 2 core Quad 2.33 GHz RAM記憶體: 2 GB DDR2 使用影音播放,請注意: *Windows XP 使用者: 建議使用“Windows Media Player”播放軟體...
Seite 207
ULTRA STATION 使用手冊 電源充電器 Input: AC 100-240V, 50~60 Hz Output: DC 5V/4A Host (2) Upstream 埠 USB 3.0 埠( Micro-B母頭) 線 USB 3.0 埠( Micro-B- Type A 母頭) Hub 集線器 Downstream埠(3) USB 3.0 Type-A 母頭 (含有充電功能) Downstream埠(4) USB 3.0 Type-A 母頭 USB 2.0 Type-A 母頭...
Seite 208
ULTRA STATION 使用手冊 1400 x 1050 16,32 bits 1280 x 1024 16,32 bits 1280 x 960 16,32 bits 1152 x 864 16,32 bits 1024 x 768 16,32 bits 800 x 600 16,32 bits 網路Ethernet (9) 10/100 Base-T Ethernet RJ-45 介面 網路埠...
ULTRA STATION 使用手冊 Fix Position 在 選擇 “顯示設定”,移動並調整您所需螢幕的位置,完成設定後,並勾選 這個功能可幫助系統記住您已經設定好的螢幕位置,每次電腦重新開機後, 螢幕位置將會保留在原位; 非常適用多螢幕使用工作者。 功能操作: WINDOWS XP 在 XP 系統下,工具列右下角會出現( )圖示,透過此圖示將可以輕鬆設定所有功能。 自動偵測辨識功能 USB 外接顯示卡 支援國際視訊標準 (VESA) 定義之DDC/EDID 功能,只要顯示裝置內建有EDID資訊並 USB 外接顯示卡系列產品 連接在 ,EDID資訊(如廠牌、型號等…)會被讀取並顯示在功能表選單上,可 USB ULTRA STATION 協助您辨識透過 所連接的螢幕 當Ultra Station沒有連接任何顯示裝置時,裝置名稱欄位會顯示為“無法辨別的螢幕”,然而在使用 某些沒有支援DDC/EDID功能的顯示裝置時也會顯示為“無法辨別的螢幕”...
Seite 227
ULTRA STATION 使用手冊 螢幕解析度設定: 預設值解析度: 1024 x 768x 32 bit 快速設定解析度選項:游標移到解析度時,會 出現解析度列表選單,請將游標移到所需解 析度之後,便會直接切換 Ultra Station 連 接的顯示設備 (如螢幕或投影機)解析度,無 須透過控制台中的顯示設定頁面進行切換 螢幕旋轉顯示設定 游標移到 Display Rotation 時,會出現螢幕 旋轉角度選單 選定旋轉角度後,Newport Station 連接的 顯示設備(螢幕或投影機)畫面會依照所選定 的角度旋轉 目前在延伸以及主螢幕切換模式下,有 四種角度選項: 0 degree :畫面 (無旋轉) 90 degrees :畫面 上方向右倒 180 degrees:畫面上下方向顛倒...
Seite 228
ULTRA STATION 使用手冊 螢幕顯示設定 延伸螢幕(預設值) 選擇 Extended(延伸桌面 模式)時,Ultra Station 連接的顯示設備 (如 螢幕或投影機)畫面會成為延伸桌面 Mirror Mode 選擇Mirror (複製螢幕模式)時, Ultra Station連接的顯示設備 (如螢幕或投影機)畫 面會仿製(clone)主螢幕顯示畫面,即兩個顯 示設備的畫面會完全一樣,並且同步顯示 複製螢幕模式啟動時,Ultra Station連接的 顯示設備解析度會自動調整成和主螢幕一致 可以選擇 “水平複製” 或 “垂直複製” 主螢幕切換 關閉螢幕 Off 選擇 Primary(主螢幕切換模式)時,Ultra Station 選擇關閉模式時,Ultra Station所連接的顯 所連接的顯示設備 (如螢幕或投影機)畫面會成為主 示設備 (如螢幕或投影機)畫面會將關閉。 螢幕,工作列也會出現在此螢幕。系統原本的主...
ULTRA STATION 使用手冊 F8 鍵:這是快速鍵,隨時可以看到目前任何視窗 下直行的程式,並可以直接拖拉視窗至指定 space 空間,並且可以選擇需要的桌面空間。 Exposé 可以以縮圖方式來檢視所有開啟的視窗。 F9 : 檢視所有視窗 F10: 檢視應用程式視窗 F11: 顯示桌面 *有關更多視窗調整的運用功能,可以參照蘋果電 腦的使用手冊。 操作功能: WORMHOLE 鍵盤滑鼠分享 o 使用滑鼠移動或關閉螢幕邊界的畫面: 在喜愛設定裡選擇"使用滑鼠游標移出螢幕邊界>在這台電腦的左邊"滑鼠游標將移出本電腦 的螢幕左邊邊界,您可以設定另一台電腦在本電腦的位置,來決定當移出螢幕邊界時,滑鼠游 標出現在你所決定的另一台電腦螢幕的邊界,讓您可以更直覺的使用滑鼠游標來進行切換 o 滑鼠中鍵: 設定是否使用滑鼠中鍵,來切換您的鍵盤與滑鼠游標,從這一台主機到另外一台主機 o 熱鍵 您可以設定熱鍵,來切換控制的主機端. 預設值為(Alt+S)
Seite 233
ULTRA STATION 使用手冊 o Switch the Keyboard usage to another computer 切換鍵盤到另外一台電腦使用 移動滑鼠游標移動到第二台主機上,打開任何編輯用的應用程式,如 Word,Excel,Point,等,您可使 用第一台主機來編輯您連接的第二台主機的應用程式 注意: 1. 請使用同一組滑鼠與鍵盤設定來控制電腦,鍵盤控制功能永遠會跟隨著滑鼠游標來控制同一台電 腦。當使用不 是同一組USB滑鼠以及鍵盤,它將會被限制只在特殊螢幕控制下。 2. 當您看到這個圖示 ( )在右下角工作列,這代表目前鍵盤與游標是受另一台主機上的鍵盤滑 鼠控制 剪貼簿功能分享 剪貼簿功能分享讓使用者輕鬆的在兩台電腦間使用複製、貼上的功能. 1. 開啟檔案並選取所需的文字或圖片, 按滑鼠右鍵選擇"複製. 2. 移動游標至第二台電腦並開啟目標檔案,移動滑鼠游標至想放置文字或圖片,按滑鼠右鍵選擇"貼上 " *圖示將隨著狀態不同而改變圖示,例如: 當接收到另外一台電腦所傳送過來的剪貼簿資料時, 工具列上圖示將變更為(...
Seite 234
ULTRA STATION 使用手冊 檔案傳輸 A. 拖曳功能 透過鍵盤滑鼠共享的功能,輕鬆兩台電腦之間的分享檔案,只需透過簡單的拖放檔案或 資料夾, 便可完成兩台電腦間的檔案傳輸。 您還能使用下列方式來進行兩台電腦間的檔案傳輸: B. File Shuttle軟體: 1. 一旦您的 Windows主機連接到 Android 平板電腦, File Shuttle軟體將會自動的啟動, 您會在 Windows 主機端看到此圖示( 2. 在Windows系統桌面下,透過File Shuttle您可以看到Android系統下的硬碟狀態,就可 以在兩台系統下傳輸您的資料. C. 複製 & 貼上: 1. 右鍵點選您欲複製的檔案,在選單中點選複製。 2. 移動滑鼠游標到另一台電腦上。 3. 移動滑鼠游標到您欲置放檔案的目錄位置,在右鍵選單中點選貼上。...
Seite 235
ULTRA STATION 使用手冊 D. 鍵盤快速鍵功能: 1.點選您欲複製的檔案,鍵盤中輸入[Ctrl+C]。 2. 移動滑鼠游標到另一台電腦上。 3. 移動滑鼠游標到您欲置放檔案的目錄位置,輸入[Ctrl+V]即可複製完成。 注意: 請使用電腦系統原先預設值的熱鍵並 使用同一組滑鼠游標與鍵盤操作(鍵盤控制功能永遠跟 隨著滑鼠游標)。 例如, 當您想從Mac作業系統下複製資料到Windows作業系統,請您遵循以下的步驟: Command 1. 如果您使用是Mac系統的鍵盤,則按下” + C” 鍵與切換滑鼠游標到 Windows Control 作業系統,然後按下 “ + V” 鍵,貼上您的資料內容到Windows 作業系統. 2. 或是從 Windows 作業系統下複製資料到MAC作業系統 : 如果您使用的是Windows 系統的鍵盤, 您需要按下 ”CTRL+C”鍵跟切換您的滑鼠游標至 Mac作業系統,然後按下 “Command+V”鍵貼上您複製的資料到 MAC作業系統. 電腦鍵盤分享於iPad 透過Wormhole Switch可讓你的電腦鍵盤分享於iPad上使用。...
Seite 236
ULTRA STATION 使用手冊 軟體說明 在Mac 作業系統 &Windows 作業系統下,請點選Wormhole Switch 圖示( 在 MAC 作業系統下的設定表: MAC OS: Windows OS: E. 關於 Wormhole Switch: 可以瞭解目前使用j5 create Wormhole Switch版本及資訊 o 本機與其他PC: 您可以快速設定您要連接的另外一台電腦的螢幕邊界位置於(右邊/左邊/上面/下面) o 暫時關閉鍵盤與滑鼠分享功能 &暫時關閉剪貼簿功能 您可以快速暫時關閉或啟用分享選項. 暫時關閉 鍵盤與滑鼠分享功能,您可以看到暫時關閉圖示( );暫時關閉剪貼簿功能,您可以看到 暫時關閉的圖示( o 喜愛設定: 其他設定 -顯示連接提示 當您取消此選項,當您啟動Wormhole Switch,系統將不會有任何的對話顯示框,顯示您是否有啟動該...
Seite 238
ULTRA STATION 使用手冊 File Shuttle 簡介 A. 工作列說明 關閉 縮到最小 其他系統相關訊息 電腦圖示 選項 工作列 切換選項 檔案列表 簡單的將一個檔案從您的主機/或是從另外一台主機 ,快速的複製到另外一台您指 定的主機裡. 您可以使用滑鼠左鍵來放大整個視窗,或是按住工作列移動視窗,到您想要的地方. o 電腦圖示:這裡顯示其他主機的桌面縮圖. o 其他系統相關訊息:它顯示其他主機名稱與可用空間. o 選項:滑鼠左鍵點擊圖示 會出現下拉式選單 1. 關於 File Shuttle 該版本的 File Shuttle 相關選項在這. 2. 總是顯示在視窗前面: 當您選擇此選項, File Shuttle 的視窗會一直出現在所有應用程式的最前 面.
Seite 239
ULTRA STATION 使用手冊 b. 點擊您的滑鼠右鍵執行即可 複製: 複製選定的文件,並將其貼上到您指定的檔案夾. 從 Dock 移除: 使用 Remove from Dock 刪除您從 Dock 裡指定的檔案. 選擇全部: 從 Dock 裡點擊滑鼠選擇所有的文件,然後複製貼上到您選擇的地方 縮到最小:按下 將視窗縮到最小. 離開 :按下 關閉 File Shuttle B. 切換選項 切換磁碟區 切換選項工具列 下一個檔案列 新增一個資料夾 上一個檔案列 上一個檔案列:點擊回到上一個您瀏覽過的檔案列. 下一個檔案列:點擊切換到下一個您瀏覽過的檔案列. 切換磁碟區:點擊 之後會出現一個下拉式選單,從這裡您可以快速選擇磁碟機或是其他文件 夾,或是您剛剛瀏覽過的資料夾,或是其他台主機.