Xtrfy XG-K2-R-RGB Bedienungsanleitung Seite 3

GB
Demo
[FN] + [9]
Breathe
[FN] + [0]
EQ
[FN] + [EQ]
Select
[FN] + [SELECT]
Change the color of all keys
except the selected ones
[FN] + [INS]
Change the color of all keys
[FN] + [DEL]
Save your color settings /
Activate saved color profile
Hardware Macros
What is a Hardware Macro?
Hardware macros make it quick and easy to bind long sequences of actions to single keys. By using the Auto,
Loop, T1, T2 and T3 keys, you can record combinations of up to 295 keystrokes, and then play them back at the
touch of a button.
No software is needed, and recorded macros are saved automatically in the keyboard's memory.
Timing Macro
[FN] + [T1]
[FN] + [T2]
[FN] + [T3]
By pressing [FN] + [9], you can swith between 7 preset lighting patterns
designed specifically for the most popular games.
3 different LED Breathing effects – Normal, Typing and Typing EQ – can be
activated by pressing [FN] + [0].
By pressing [FN] + [EQ], you can choose between 8 LED equalizer effects
moving in sync with the sound of the game or your music.
The Select key is used for selecting the keys that you want to adjust in the
K-LED/K-Mask mode. For instructions, see "K-LED".
To change the color of all keys except the ones you have selected in the
K-LED/K-Mask mode, press [FN] + [INS]. The keyboard's color palette
appears. (For more colors, press the spacebar to switch between
4 different palettes.) Pick a color.
To change the color of all keys at once, press [FN] + [DEL]. The keyboard's
color palette appears. (For more colors, press the spacebar to switch
between 4 different palettes.) Pick a color.
This feature will also delete the current K-LED/K-Mask settings.
The [HOME], [PGUP], [END] and [PGDN] keys can be used to save up to 4
different color profiles.
To save your current setting, hold down [FN] + one of the mentioned keys
for 2 seconds.
To activate a saved color profile, press [FN] + the key of the color profile
([HOME], [PGUP], [END] or [PGDN]).
Timing Macros remember not only the keys you press, but also the time
delay between your keystrokes.
To record a Timing Macro, hold [FN] + one of the Timing Macro keys (T1,
T2 or T3) down for 2 seconds. Release the keys, and the light in the upper
right corner (X) starts blinking slowly. Type the keys you want to record.
To stop recording, press [FN]. The light (X) stops blinking and your macro
is saved.
To run the recorded Timing Macro, press [FN] + the key of the macro you
want to run (T1, T2 or T3). The macro is run once. If you want to stop the
macro before it has finished, press any key.