Windows 95 Calibration; Dos Users - ACT LABS RS Bedienungsanleitung

installation

Windows 95 Calibration

You will need to calibrate the wheel when you install your ACT
LABS RS. In Windows 95, take the steps listed below.
1. From the Start menu, select Settings/Control Panel.
2. Double click the Game Controllers icon. If the ACT
LABS RS driver is present, go to Step 5; otherwise
continue to steps 3 and 4.
3. Click Add, then click Add Other, finally click Have
Disk.
4. Ensure your RS Setup CD is in your CD-ROM drive
and specify the disk drive. For example, type "D:" if
your CD-ROM is drive D. Click OK.
5. Select ACT LABS RS and click Properties.
6. Follow the instructions on your screen to properly
calibrate your new controller.
Note: To use your ACT LABS RS in Windows 95, the function
button on your dashboard must be raised.

DOS Users

For DOS users, the ACT LABS RS functions as a default 4-button
controller. The steering wheel controls X-axis movements and
the pedals control Y-axis movements. The left and right gear
shifters would be primary 1 & 2 fire buttons, and the middle left
and right wheel face buttons would be secondary 3 & 4 fire
buttons.
Note: To use your ACT LABS RS in DOS, the function button on
your dashboard must be depressed.
8