Cisco Systems Linksys WUSB54GSC Kurzanleitung Seite 8

B
Select the wireless mode you
want to use. Then, enter the
SSID for your network.
Infrastructure Mode - Use this
mode if the Adapter will
connect to a wireless router or
access point.
Ad-Hoc Mode - Use this mode
if the Adapter will directly
connect to another wireless
device without using a wireless
router or access point.
SSID - Enter the name of your
wireless network.All devices in
your wireless network must use
this name. It is case sensitive.
Click Next.
If you chose Infrastructure
Mode, the
screen will appear. If you
chose Ad-Hoc Mode, the
Ad-Hoc Mode Settings
will appear. Select your chan-
nel and network mode settings.
Channel - Select the correct
channel for your network.
Network Mode - Select Mixed
Mode if you want Wireless-B
and Wireless-G devices in the
network. Select G-Only Mode if
you do not want any Wireless-B
devices in the network.
Click Next.
8
Wireless Security
screen
Wireless Mode
Ad-Hoc Mode Settings