English - Airthink Bed Cleaner Benutzerhandbuch

ENGLISH

ATTENTION: This appliance is for hou-
sehold use only. The product has been
mainly designated for light dry vacuum
cleaning, please do not attempt to use
any other purpose. Before operating the
appliance, please read this manual care-
fully and retain it for your future reference.
PRECAUTION
Before switching on, make sure that the
voltage of your electricity supply is the
same as that indicated on the rating label
on the cleaner.
This product is intended to be an indoor
appliance in order to clean beds, sofas,
pillows, carpets and other fabric surface.
Never use outdoor, toilet, and other humid
place.
Do not use this appliance on a wet sur-
face. Use on a wet surface is dangerous.
Do not use the cleaner if the power cord
or plug is damaged. It must be replaced
by the manufacture or the authorized en-
gineer in order to avoid any hazard
Do not attempt to disasseble or revise the
main body except authoized engineer.
Do not vacuum up flammable substances
or corrosive liquids and do not suck up
ashes until they are cold. Do not suck up
biological or chemical materials.
Do not use the cleaner near a gas stove,
heater or open fire.
Before removing the plug from the outlet,
turn the switch to the "OFF" position.
Do not attempt to unplug your appliance
with wet hand. Always dry one's hands
before handling this product to avoid risk
of electric shock.
Use the original replacement, which the
manufacture supplies, in order to maintain
the best efficiency. Ex) filter, brush, and
UV light lamp.
8
Do not use the UV light to expose people,
pets, or animals of any sort.
This is not a toy. Children should be su-
pervised to ensure that they do not play
with the appliance.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge, un-
less they have been given supervision or
instruction concerning use of the applian-
ce by a person responsible for their safety.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Be sure to turn power switch to the "OFF"
position and disconnect the power cord
from the wall outlet before replacing any
of the parts.
MAIN BODY
Upside
3
5
6
Bottom
1
3
4
7
1
2
4
2
5
6
8