Instructions For Installation - Whale GK1512 Bedienungsanleitung

• Do not screw directly to the hull – must be mounted on a bulkhead or an additional board.
• WARNING: Installation must be carried out by a qualified electrician. Improper wiring can cause a fire resulting in injury or death. Suggested wiring information (Figure
9) is given as a guide only, and wiring must comply in accordance with the applicable electrical standards. Appropriate size fuses or circuit breakers must be installed.
• Do not shorten the wires.
Contact Whale Support +44 (0)28 9127 0531 for specific advice on your installation.
6. PARTS
QTY: 1
QTY: 1
QTY: 1
QTY: 1
7.

INSTRUCTIONS FOR INSTALLATION

The grey waste tank is designed for use with grey waste water in recreational marine vessels. Typical installation is shown in Figure 1. For tank dimensions see Figure 2.
250mm (9.9")
250mm (9.9")
425mm (16.8")
250mm (9.9")
Grey Waste Lid with Integrated Sensor
Grey Waste Tank
Gulper 220 Grey Waste Pump
Screw Kit
Figure 1 Typical Grey Waste Tank Installation in Multi Drain Grey Waste System
8ltrs (2.1 US gals) Tank
190mm
(7.5")
8ltrs (2.1 US gals) Tank with Gulper 220
Figure 2 Grey Waste Tank Dimensions
230mm
(9.1")
350mm (13.8")
185mm
(7.3")
600mm (23.7")
410mm (16.2")
180mm
(7.1")
600mm (23.7")
2