Velleman NVR2 Schnellanleitung Seite 6

network status
(WAN) internet connected
(WAN) local connection
(LAN) auto mode – Mbit/s
(LAN) DHCP / static IP mode
17 available hard disk space
18 channel status
auto search on
live audio on
audio playback on
original size
recording
alarm event
live information
19 quick operation
Click to show the power-off panel to stop or reboot the system.
Click to show the channel switch panel and select the channel you want.
Switch to the channel you want first, then click
red frame on the bottom left of the screen to move to the area where you want to zoom in.
Click to enter PTZ mode and show the PTZ camera control panel.
Click to open the IP search window and check the connection status of each channel.
20 main menu
QUICK START
SYSTEM
EVENT
INFORMATION
ADVANCED CONFIG
SCHEDULE SETTING
21 playback panel
fast forward
fast rewind
play/pause
stop
V. 01 – 04/03/2013
NVR2
Click to set the status display, image settings, and date & time.
Click to set the system configuration.
Click to enter the event search menu.
Click to set CONNECTION, CAMERA, DETECTION, ALERT, NETWORK,
DISPLAY, RECORD and NOTIFY.
Click to set the recording timer.
Click to fast forward at 4 to 32 times normal speed.
Click to fast rewind at 4 to 32 times normal speed.
Click to play the latest recorded video clip. Click again to pause.
In pause mode, click
one frame backward.
Click to stop the video playback.
6
(WAN) internet disconnected
(LAN) auto mode – Gbit/s
(LAN) camera disconnected
auto search off
audio off
audio playback off
fit to screen
human detection event
motion event
playback information
to enter zoom mode. Click and drag the
once to go one frame forward, or to go
©Velleman nv