Technical Specifications - Velleman NVR2 Schnellanleitung

11.3 Installing the EagleEyes app
Prerequisites
Before installing EagleEyes to your mobile phone for remote surveillance, make sure you have checked the
following:
 You have subscribed to and you can access mobile internet services for your mobile phone.
 Note: You might be charged for internet access via wireless or 3G networks. For the internet access rate
details, check with your local network operator or service provider.
 You have noted down the IP address, port number, user name and password used to access your network
camera from the internet.
Where to download
1. Connect to www.eagleeyescctv.com from your mobile device, and sign in.
Please do not try to download EagleEyes from your computer.
For Android, select the download link from the website to start downloading.
o
For iPhone and iPad, two versions of EagleEyes are available: EagleEyesHD Plus (at a fee), and
o
EagleEyesHD Lite (free).
2. Select the version you want, and you will be directed to the App Store to download the application.
3. When the download is completed, EagleEyes will install automatically to the default location or any location
you choose.
For more details about configuring and operating EagleEyes, visit the official website www.avtech.com.tw
11.4 Configuration
Before configuring push video, make sure:
4. The DVR system is set up as described in point 3 Connection and Setup in the full manual on the included
CD-ROM.
5. The DVR is connected to the internet.
6. The EagleEyes app is installed on your mobile device (see Installing the EagleEyes app above).
7. Open EagleEyes, and add this DVR to the EagleEyes address book.
For more details about EagleEyes operation, visit www.eagleeyescctv.com.
8. In the EagleEyes app, enable push video as described below.
9. Trigger the alarm sensor to see if you successfully receive push video.
12.

Technical Specifications

video compression
video input
video output
recording mode
multiplex operation
audio I/O
motion detection area
motion detection sensitivity
pre-alarm recording
backup device
hard disk storage
web interface
V. 01 – 04/03/2013
NVR2
H.264 / MPEG4 / MJPEG
1 LAN port up to 12 channels with a hub/switch
HDMI output 1920 x 1080 pixels
manual / timer / motion / alarm
live display, record, playback, backup and network
1 audio output (mono)
22 x 18 grid per camera
10 adjustable variables with precise calculation for motion detection
yes
USB 2.0 backup and network remote backup
built-in SATA type: supports 2 x HDD, supported HDD capacity over 3 TB
(HDD not incl.)
external eSata: external hard disk or disk array (Linux system support)
supports free CMS software (Windows & Mac OS)
11 ©Velleman nv