Ravcore TRIDENT BT Installationsanleitung Seite 12

EN
Wireless (Bluetooth
1. Please turn on the speaker system with the power switch
situated at the rear panel of the subwoofer. The LED lights will
illuminate in blue, the Mode LED will Illuminate in orange to
indicator in Bluetooth
2. Have your Bluetooth
broadcast. For connection to the speaker system, please
ensure the Bluetooth
3. Once your device detects the system, it should display the
"RAVCORE TRIDENT" name on its display screen. The speaker
beepers when paired.
4. Select pairing, and then connect functions to commence the
A2DP audio streaming mode. Mode LED will illuminate in blue
during Bluetooth
when pause or Bluetooth
5. To disable the mode, simply disconnect the Bluetooth
nection in your device. Or long depress the Bluetooth
button on remote control and the speaker beepers.
Alternative input connection:
via 3.5 mm stereo jack on remote
control
Analog
1. Connect the 3.5 mm plug end from the wired remote control
to your media device, such as Mp3/Mp4, CD/DVD player, LCD
TV, smartphone, tablet, or notebook.
2. Please ensure any connected Bluetooth
else the signal will continue to stream via Bluetooth
3. Alternatively, you can connect a 3.5 mm plug from the media
player to the side of the wired remote control.
REMOTE CONTROL
LED
开
)
®
关
mode. This is the default source mode.
®
enabled device activated for Bluetooth
®
device supports A2DP profile.
®
playback time and illuminate in orange
®
disconnection.
®
3.5 mm stereo
jack: audio input 2
device Is turned off,
®
OPERATIONS
1. Ensure the master volume is at the lowest setting.
2. Turn on the main AC power and switch on the speaker system
from the rear power switch.
3. Start the media player and song. For Bluetooth
®
device, please start the music playback apps. For Analog
connection, start the playback from the Mp3/Mp4 player or
notebook, etc.
4. Slowly Increase the volume level to your preferred level. The
master volume dial is on top of the remote control.
5. For added sound effects, you can adjust the bass levels on the
rear panel.
6. Breathing lights operations: Press "Power LED Lights" button
on the remote control to turn on or off the lights. Rotate LED
Lights knob on the rear panel or subwoofer to adjust the
con-
®
lighting.
reset
®
7. Note: It is advisable not to turn the volume too loud or to its
extreme volume limit to avoid damage to the speaker driver
material and impair your hearing. Always adjust in slow
increment.
mode.
®
Ideal listening position and placement
FL – front left
FR – frront right
SW – subwoofer
enabled
®
12