Troubleshooting - EINHELL BH 2000/1H Originalbetriebsanleitung

10. Troubleshooting

If the equipment is operated properly you should experience no problems with malfunctions or faults.
In the event of any malfunctions or faults, please check the following before you contact your customer
services.
Problem
No operation / no
heating
The equipment
does not react
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Possible cause
- The power plug is not connected
- Equipment in standby
- The thermostat is set too low
- "Timer" has switched off the equip-
ment
- The equipment has been switched
off by the heating program
- The equipment is locked to prevent
changes to settings
GB
- Connect the power plug
- Press the On/Off button
- Increase the temperature
- Change the selected time
- Change the heating program
- To unlock it, press the button (Fig.
7a/Item 16)
- 22 -
Remedy