Accessories; Protecting The Environment - Black&Decker KS999E Bedienungsanleitung

• Push the shoe plate forward.
• Turn the locking knob (9) in direction B to lock
the shoe plate in place. Make sure that the
shoe plate is supported by the guide ribs.
Variable speed control
• Set the variable speed control knob (3) to the
required speed range. Use a high speed for
wood, medium speed for aluminium and PVC
and low speed for metals other than aluminium.
Turbo selector
• For fast and effi cient straight cuts in wood, set
the turbo selector (4) to "max".
• For accurate straight and curve cutting and
a smooth surface fi nish, set the turbo selector
(4) to "min".
Switching on and off
• To switch the tool on, press the on/off switch
(1).
• For continuous operation, press the lock-on
button (2) and release the on/off switch.
• To switch the tool off, release the on/off switch.
To switch the tool off when in continuous
operation, press the on/off switch once more
and release it.
How to use the SightLine™ feature (fi g. E)
• Use a pencil to mark the cutting line.
• Position the jigsaw over the line (17).
Viewing from directly above the jigsaw the line of
cut can be easily followed. Should this view be
restricted for any reason, the indent (18) can be
used as an alternate cutting guide.
Hints for optimum use
Sawing laminates
As the saw blade cuts on the upward stroke,
splintering may occur on the surface closest to the
shoe plate.
• Use a fi ne-tooth saw blade.
• Saw from the back surface of the workpiece.
• To minimise splintering, clamp a piece of
scrap wood or hardboard to both sides of the
workpiece and saw through this sandwich.
Sawing metal
• Be aware that sawing metal takes much more
time than sawing wood.
• Use a saw blade suitable for sawing metal.
• When cutting thin sheet metal, clamp a piece
of scrap wood to the back surface of the
workpiece and cut through this sandwich.
• Spread a fi lm of oil along the intended line of
cut.

Accessories

The performance of your tool depends on
the accessory used. Black & Decker and
Piranha accessories are engineered to high
quality standards and designed to enhance
the performance of your tool. By using these
accessories you will get the very best from your
tool.
This tool is suitable both for U-shank and T-shank
saw blades.
Maintenance
Your tool has been designed to operate over a long
period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
• Regularly clean the ventilation slots with
a clean, dry paint brush.
• To clean the tool, use only mild soap and a
damp cloth. Never let any liquid get inside the
tool and never immerse any part of the tool into
liquid.
• Occasionally apply a drop of oil to the axle of
the blade support roller.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fi tted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the new plug.
• Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth
terminal. Follow the fi tting instructions supplied
with good quality plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
ENGLISH
5