Troubleshooting; Technical Data - Siemens Gigaset Repeater Bedienungsanleitung

Miscellaneous
Miscellaneous

Troubleshooting

Problem
Left LED flashes continuously
when the registration proce-
dure has been concluded
Left LED flashes continuously
at a selected location
Left LED does not light up at all No power
No reception of the handset in
the area of the repeater
Call is interrupted when mov-
ing from one reception range
to another

Technical data

20
Cause
No radio connection to the
base station
No radio connection to the
base station
Repeater not registered
No radio connection to the
base station
Handset cannot find the
repeater
No support
Standards:
Radio frequency
range:
Transmit power:
Range:
Power supply:
Power consumption: 6 VA
Operating tempera-
ture:
Dimensions (mm):
Weight:
Power cable length:
Action
Repeat registration
Select a new location
Check the power point
Repeat registration
Select a new location
Switch handset on and off
Refer to the table above "Call conti-
nuity"
DECT, GAP
1880 MHz - 1900 MHz
10 mW average power per channel
max. 300 m outdoors,
max. 50 m indoors
220/230 V, 50 Hz (plug-in power
unit)
-10 °C to + 50°C
131 x 111 x 50 (LxBxH)
136 g
approx. 3 m