Jet JRT-2 Gebrauchsanleitung Seite 7

Holes may need to be drilled according to your router´s hole
pattern (Fig 6).
Attach the router with mounting plate to the table by use of
supplied screws (Fig 7‐1, Fig 7‐2).
Fig 5
Fig 6
Attach the Lateral Workpiece Guide (Fig 8):
Attach the support bracket (M) with 2screws.
Attach the lateral workpiece guide (C) with 2 carriage bolts,
washers and knobs.
Attach the Fence to the Table (Fig 9):
Attach the fence to the table, with 2 carriage bolts, washers
and knobs.
7
Fig 7‐1
Fig 7‐2
Fig 8
Fig 9